CCreate a wireless connection to your home network with
broadband Internet access
1Press 34 to select [Wireless], then press 2.
2Press 2 to start searching for your home network.
3Press 34 to select your home network with wireless broadband Internet access, then press 2.
4Select [Automatic] > (Enable Proxy?) [No (default)].
> The NP1100 displays a confirmation screen that the settings are saved.
Here is how to create a wireless connection any time ‘after’ the initial setup:
1Ensure that your wireless access point or wireless router is turned on and connected to broadband Internet.
2Ensure that the NP1100 is turned on and connected to the wireless access point or wireless router.
3On the NP1100, configure the network:
4Press Home.
5Press 34, then to select [Settings] > [Network setup] > [Wireless] > [Search for networks].
6Press 34, then to select network.
• Enter encryption key (if required).
Note For details on how to create wired connection, refer to the User Manual.
np1100_qsg_01eng.indd 6 |
|