
3 Get started
Charge power
SA060 has a
Note
Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
The charging animation stops and the
icon is displayed when the charging process is completed.
To conserve battery power and increase the play time, do the following on SA060:
Set the backlight timer to a low value (go to
> [Display settings] > [Screen off timer]).
Note
When you connect SA060 to a computer, you are [Charge & transfer] or
[Charge & play]. If no option is selected, [Charge & transfer] applies.
To play the SA060 when you charge power, select [Charge & play].
Battery level indication
The display indicates the approximate levels of the battery status as follows:
100% 75% 50% 25% 0%
»
battery is low.The player saves all settings and switches off within 60 seconds.
First-time setup
SA060 to a PC,
install Philips Device Manager on the PC. Over
the player through Philips Device Manager. When you connect the SA060 to the PC for
1Select InstallPhilips Device Manager.
2Follow the
Note
The installation requires you to agree to the license terms.
If the
1Select My Computer (Windows XP / Windows 2000) / Computer (Windows Vista / Windows 7).
2Right click on the Philips GoGear SA060 icon.
3Select Install Philips Device Manager.
4Follow the
10EN