Program radio stations manually, Other features

In tuner mode, press / to select a preset number.

You can program a maximum of 20 preset radio stations (FM).

1 In the tuner mode, press and hold PROG for more than 2 seconds to activate automatic program mode.

»[AUTO] (auto) is displayed.

»All available stations are programmed in the order of waveband reception strength.

»The ﬁrst programmed radio station is broadcast automatically.

Program radio stations manually

You can program a maximum of 20 preset radio stations (FM).

1 Tune to a radio station.

2 Press PROG to activate program mode.

»[PROG] (program) is displayed.

3 Press /to allocate a number to this radio station, then press PROG to conﬁrm.

4 Repeat the above steps to program other stations.

•To overwrite a programmed station, store another station in its place.

•Position the antenna as far as possible from TV, VCR or other radiation source.

•For optimal reception, fully extend and adjust the position of the antenna.

Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations.

If you listen to a FM station with RDS signal, “RDS” is displayed.

Display RDS information

1 For a FM station with RDS, press RDS repeatedly to display various broadcast information.

This unit can be used as an alarm clock. The disc/radio/USB/SD/MMC is activated to play at a preset time.

1 Ensure that you have set the clock correctly.

2 Press to switch to standby mode.

3 Press TIMER.

»A prompt to select the source is displayed.

4 Press CD, or TUNER or USB/SD to select a source.

5 Press TIMER to conﬁrm.

»The clock digits are displayed and begin to blink.

6 Press / to set the hour.

7 Press TIMER to conﬁrm.

8 Press / to set the minute.

»The timer is set and activated.

To deactivate or re-activate an alarm timer

1 Press TIMER ON/OFF repeatedly to activate or deactivate timer.

»If timer is activated, the display shows

»If timer is deactivated, disappears on the display.

E n g l i s h

EN 13