Philips MCM330 user manual Troubleshooting

Page 15

9 Troubleshooting

Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site www. philips.com/welcome. When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.

No power

Ensure that the AC power plug of the unit is connected properly.

Ensure that there is power at the AC outlet.

To save power, the unit switches to standby automatically 15 minutes after a play reaches the end and no control is operated.

No sound

Adjust the volume.

No response from the unit

Disconnect and reconnect the AC power plug, then turn on the unit again.

No disc detected

Insert a disc.

Check if the disc is inserted with the print side facing inward.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc.

Use a finalized CD or correct format disc.

Remote control does not work

Before pressing any function button, first select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the unit.

Insert the battery with its polarities (+/– signs) aligned as indicated.

Replace the battery.

Aim the remote control directly at the sensor on the front of the unit.

Cannot display some files in USB device

The number of folders or files in the USB device has exceeded a certain limit. This phenomenon is not a malfunction.

The formats of these files are not supported.

USB device not supported

The USB device is incompatible with the unit. Try another one.

Poor radio reception

Increase the distance between the unit and your TV or VCR.

Fully extend and adjust the FM antenna.

Clock/timer setting erased

Power has been interrupted or the power cord has been disconnected.

Reset the clock/timer.

Timer does not work

Set the clock correctly.

Switch on the timer.

16EN

Image 15
Contents Register your product and get support at Contents Use only with the cart SafetyWhen this crossed-out wheeled Hearing safetyListen at a moderate volume Be careful not to adjust the volume as your hearing adaptsEnvironmental information Your productIntroduction What’s in the boxJack for the headphone SD/MMC Jack for a SD/MMC card Overview of the main unitOverview of the remote control Get started PlacementPrepare the remote control Connect powerTurn on Auto install radio stationsSwitch to standby Set clockPlay options PlayListen to radio Adjust soundOther features Program radio stations manuallyFM stations with RDS Specifications Product informationMaintenance Clean the cabinetUSB playability information Troubleshooting Koninklijke Philips Electronics N.V. All rights reserved