Philips Portable DVD Player PET742
Quick start guide
Note:
During play, you can:
–Swivel the screen of the player to watch for your convenience.
1Charge your battery
This portable DVD player is designed with a
1Slide the POWER switch to the OFF position (charging of the DVD player only possible in the
CHR
2Connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) to start charging.
➜The CHR indicator turns red.
➜When the battery is fully charged, the indicator turns off.
3Disconnect the power adaptor cord (or the car adaptor) when the CHR indicator turns off.
Note:
–You can also connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) directly wherever possible.
2Prepare the remote control
For first time use
Remove the protective tab to activate the remote control battery.
To replace the battery:
1Open the battery compartment.
2Insert 1 CR2025 battery with correct polarity
3Close the battery compartment.
3Enjoy (Disc operation)
1Open the lid of the player.
2Slide the POWER switch to ON to switch on the DVD player.
➜The 
indicator turns on.
3Slide OPEN2 on the player.
4Remove the protective card (if any) and load a disc with the label side facing up.
5Close the disc door.
➜Playback starts automatically. If not, press 2;.
6To stop playback, press 9.
–Press 
directly to adjust brightness of screen backlight to match lighting conditions.
3Enjoy (AV OUT)
Connecting additional equipment (TV for example)
1Connect the AV OUT socket on the set to the video and audio sockets on a TV as shown directly.
2Switch on the TV and set to the correct video- in channel.
➜You can consult the owner's manual of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.)
|
| TV |
White | Not |
|
|
| |
Red | supplied | AUDIO IN |
Yellow |
|
|
|
| VIDEO IN |
| Printed in China | WK0907 |
3OPEN HERE