Philips PET742/12 user manual Charge the battery, Tip

Page 12

If you contact Philips, you will be asked for the model and serial number of your apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Charge the battery

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the player.

Use only the supplied AC adaptor to charge the battery.

Note

The type plate is located on the bottom of the player.

You can only charge the player when it is in power-off mode.

1Slide the POWER ON/OFF switch to OFF position.

2Connect the supplied AC adaptor to the player and to the AC outlet.

»The charge indicator turns on. It takes less than 7 hours to fully charge the battery.

»When the battery is fully charged, the charge indicator turns off.

Tip

When the battery is fully charged, the player can continuously play for more than 5.5 hours in [Dim] mode and more than 4 hours in [Normal] mode.

English

EN 13

Image 12
Contents Register your product and get support at Contents Important safety instructions Hearing safety Recycling Your portable DVD player NorgeIntroduction What’s in the boxOverview of the main unit Page Overview of the remote control C dGet started Repeat 1/ALLCharge the battery TipInstall remote control battery Connect additional equipmentUse your player Turn onSelect OSD language Play discs Play optionsAdjust brightness of screen backlight Select audio modeZoom Rotate picturesAdjust settings Troubleshooting Product informationPage Koninklijke Philips Electronics N.V. All rights reserved