Philips PET742/12 user manual Install remote control battery, Connect additional equipment

Page 13

Install remote control battery

Caution

Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.

Risk of decreased battery life! Never mix different brands or types of batteries.

Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For fi rst-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1

2

3

Open the battery compartment.

Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

Close the battery compartment.

Connect additional equipment

Caution

Turn off your player before connecting to any additional equipment.

You can connect the player to aTV or an amplifi er to enjoy DVDs or Karaoke. Match the color of the AV cables (the AV cable connected toTV is not supplied) with the jacks: the yellow cable is for the yellow video jack, the red/ white cable is for the red/white audio jacks.

14EN

Image 13
Contents Register your product and get support at Contents Important safety instructions Hearing safety Recycling Norge Your portable DVD playerWhat’s in the box IntroductionOverview of the main unit Page C d Overview of the remote controlRepeat 1/ALL Get startedTip Charge the batteryConnect additional equipment Install remote control batteryTurn on Use your playerSelect OSD language Play options Play discsSelect audio mode Adjust brightness of screen backlightZoom Rotate picturesAdjust settings Product information TroubleshootingPage Koninklijke Philips Electronics N.V. All rights reserved