Philips DVD740VR owner manual Timer Recording, Daily

DVD740VR 4/12/02 12:08 PM Page 34

34 Timer Recording

VCR

Follow the steps below to program your DVD/VCR to record TV programs while you’re away from home. Before you begin:

● Set up the TV channels at the DVD/VCR. Details are on page 24.
● Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the TV screen briefly after you select PROGRAM,
followed by the VCR menu. Follow the directions on page 27 to
set the VCR’s clock.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).			1
● Press OUTPUT SELECT so the green VIDEO light appears on
the front of the DVD/VCR.
● Press VCR/TV so the green VCR/TV light appears on the front
of the DVD/VCR.
Do each step within 60 seconds of the previous step.		2,3
1	Press VCR, then press DISC/MENU.
	SELECT op CHOOSE B

→ PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

2 Press PLAY B (o) or STOP C (p) to select PRO- GRAM, then press FF g (B).

SELECT op CHOOSE B

→ ONCE DAILY WEEKLY PROGRAM REVIEW

TO END PUSH EXIT

3 Press PLAY B (o) or STOP C (p) to select a

ONCE, DAILY, or WEEKLY recording. Then, press FF g (B).

●ONCE: The DVD/VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The DVD/VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time.

●WEEKLY: The DVD/VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

POWER

MARKER

SETUP AUDIO SUBTITLE ANGLE

REC/OTR	REPEAT	REPEAT
		A-B
	CHANNEL/SKIP
	CLEAR
TITLE	MODE	RETURN

OUTPUT SELECT

DVDVCR

DISC

MENUOK

STOP		PLAY
REW		FF
	PAUSE
		TIMER SET
1	2	3
		VCR/TV
4	5	6
		MEMORY
7	8	9
		SPEED
+10	0
SEARCH MODE DISPLAY		ZOOM SLOW
TIME SEARCH	STATUS/EXIT

Daily

Recording (example)

DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8-

SELECT PROGRAM NUMBER

TO END PUSH EXIT

Helpful Hint

•To make a correction while pro- gramming a timer recording, press CLEAR until the cursor is flashing on the item you want to change. Then enter the correct information.