Programming track numbers, MP3-CD only

1During playback, select your play mode by pressing CD MODE once or more until the desired play mode is shown.

•The SHUFFLE/ REPEAT play options can be combined and used with a program: e.g. SHUFFLE REPEAT ALL - repeats the entire program in random order.

2To return to normal playback press CD MODE until the various SHUFFLE/ REPEATmodes are no longer shown.

•You can also press 9 to quit the play mode.

Programming track numbers

You may store up to 30 tracks in the desired sequence. If you like, store any track more than once.

1In the stop position, first select your album and tracks as follows:

•press ALBUM, PRESET + or - once or more to find your album.

•Turn the ROTARY NAVIGATION anti- clockwise or clockwise (or ¡ or ™ buttons on the remote, AZ1155 only) to select a particular track.

➜Display: album/ title flashes if you have not made the respective selection.

CD:

•First use the ROTARY NAVIGATION (or ¡ or ™ buttons on the remote, AZ1155 only) to select a particular track.

2When your chosen track number appears, press PROGRAM once to store the track.

➜Display shows program and 'Prog' briefly followed by your selected track number.

➜If you attempt to program without first selecting a track number, no SEL is shown.

3Repeat steps 1 and 2 to select and store all desired tracks in this way.

➜FULL is displayed if you attempt to program more than 30 tracks.

4To play your program, press 2;.

•In the stop position, press and hold down PROGRAM for more than 2 seconds.

➜Display shows all your stored track numbers in sequence, or the MP3-CD title and album numbers.

➜Display shows 'no Pr' if no title/track programmed.

You can erase the contents of the memory by:

–opening the CD door;

–selecting TUNER source;

–pressing 9 twice during playback/ in the stop position

English

• Continue with the following, steps 2-4.