CD/VCD/MP3-CD
PROGRAMMING TRACKS
Programming tracks of disc is possible only when playback is stopped. Up to 20 tracks can be stored in the memory in any order.
For CD only
1.In stop mode, press PROG (on remote control) to enter programme setting.
™PROG will flash on the display.
2.Press digits 0 - 9 on the remote control or ∞ / § to select the desired track.
3.Press PROG to store the select track. The number “XXX” represents the track no.
• Repeat steps 1 to 3 to store other tracks.
4.Press 9 to end programme setting.
™PROG will remain on the display.
• Press PROG (on remote control) in stop mode to review the programme sequence.
5.Press 2; to play the programmed tracks.
•If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly.
™ REPEAT/REPEAT ALL icon and PROG will appear on the display.
6.Press 9 in stop mode to clear the programme. ™ PROG will disappear from the display.
Notes :
For
1.In stop mode, press PROG on the remote control to enter programme setting.
™PROG will start flashing and " P01" will be displayed.
™On TV screen, "PROG" program list (5 lines per page) will be displayed.
2.Press digits 0 - 9 on the remote control or ALBUM+/- to select the desired album.
3.Press PROG to store the selected album. The number “AXX” represents the album no.
4.Press ∞ / § repeatedly (or digits 0 - 9 on the remote control) to select the desired TRACK for programming.
5.Press PROG to store the selected track.
™PROG will remain flashing on the display.
•Repeat steps 1 to 5 to store other desired album and track.
6. Press 9 to end programme setting.
•To review programme, press PROG repeatedly in stop mode.
™PXX indicates a programme sequence. AXX indicates an album number. XXX indicates a programme.
7.Press 2; to start programme playback. You can press ∞ / § to select the programmed track to play.
8.Press 9 once to stop programme playback, or twice to clear the programme.
English
13