Power Supply, Batteries not Supplied

POWER SUPPLY

IMPORTANT!

•For best CD/MP3-CD/VCD playback, please plug in your set to an AC power supply where convenient.

•If operated in DC mode, see below approximate playtime. (Playtime is also varied from different brand batteries) :

Battery type	Playtime
Alkaline	approximate 9 hrs
Zinc Cartonate	approximate 45 minutes

•The CD part of this system also serves as a Video CD player if you connect it to your TV set.

•Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi-system TV).

BATTERIES (NOT SUPPLIED)

Whenever convenient, use the mains supply if you want to conserve battery life. The battery supply will be switched off when the set is connected to the mains. Make sure you remove the plug from the set and wall outlet before inserting batteries.

English

Batteries

1.Open the battery compartment and insert six batteries, type R14, UM2 or C-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "-" symbols inside the compartment.

Remote control

1.Open the battery door and insert two batteries, type AAA, R03 or UM4 (preferably alkaline).

6 x 1.5V R14/ UM2/ C CELL

2.Replace the compartment door, making sure the batteries are firmly and correctly in place.

3.Remove the batteries if they are exhausted or if they will not be used for a long period.

–The incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst. Therefore:

–Do not mix battery types, e.g. alkaline with zinc carbonate.

–When inserting new batteries, replace all at the same time.

–Remove the batteries if the set is not to be used for a long time.

Note :

–The battery supply is switched off when the set is connected to the mains.

TV screen is disabled during CD / MP3-CD playing if your AZ5140 is battery powered.

Batteries contain chemical substances, so they should be disposed of properly.