Philips DVP620VR manual Other Functions

STATUS DISPLAY [ON] → BLUE BACKGROUND [ON] CLOCK DISPLAY [ON]

Programming a Recording (TIMER) Other Functions

	How to check, or delete a programmed
	recording (TIMER)	SELECT K L CHOOSE B
1	Press VCR, then DISC/VCR MENU.	ONCE
2	Press K/L to select “TIMER”, then	DAILY
		WEEKLY
	press B.	→ TIMER LIST

3Press K/L to select “TIMER LIST”, then press B.

4 Select timer block with B. END=EXIT

Timer block disappeared when I pressed B.

You have checked all the programmed recordings. If you want to check them again, repeat steps 1 to 4.

5To cancel the recording, press CLEAR.

6To end, press STATUS/EXIT.

7Press TIMER SET.

How to change a programmed recording (TIMER)

1Press VCR, then DISC/VCR MENU. ONCE

2	Press K/L to select “TIMER”, then	TIMER - 1 2 3 4 5 6 7 8 -
	press B.
3
	Press K/L to select “ONCE”,
	“DAILY”, or “WEEKLY” recording
4	with K/L, then press B.	SELECT TIMER NUMBER
	Select a TIMER block with
		END=EXIT

numerical key pads. (The flashing

number indicates an empty TIMER block.)

5Press CLEAR to delete information and input correct information with numerical key pads.

6To end, press STATUS/EXIT.

7Press TIMER SET.

1Press VCR, then DISC/VCR MENU. SELECT K L CHOOSE B

2	Press K/L to select “VCR SET UP”,	→STATUS DISPLAY	[ON]
	then press B.
3		BLUE BACKGROUND [ON]
	Press K/L to select “STATUS	CLOCK DISPLAY	[ON]
4	DISPLAY”, then press B.
	Press K/L to select “ON” or
5	“OFF”, then press B.
	To end, press STATUS/EXIT.	END=EXIT

Which settings can I choose?

“ON”: Shows the status display for a few seconds only.

“OFF”: Switches off the status display.

Blue Background on or off

If you want the TV screen to be solid blue when a weak signal is received, set “BLUE BACKGROUND” to “ON”. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set “BLUE BACKGROUND” to “OFF”.

1Press VCR, then DISC/VCR MENU. SELECT K L CHOOSE B

2Press K/L to select “VCR SET UP”,

then press B.

3 Press K/L to select “BLUE BACKGROUND”, then press B.

4Select “OFF” (no blue background) or “ON” (blue background on)

with B.	END=EXIT
5 To end, press STATUS/EXIT.

Clock Display

This function allows you to switch the DVD/VCR display off. It is useful in case you feel disturbed by the display-brightness while watching TV in a dark room. It also reduces the power

English

Hint for Timer Recording

• If there is a power failure or the DVD/VCR is unplugged for

more than 1 minute, the clock setting and all timer settings

will be lost.

• If a tape ends during TIMER RECORDING, the DVD/VCR will

stop, eject the tape, and switch to the DVD mode

automatically as ‘ ’ blinks. (If the DVD power is off,

the DVD/VCR will become the STANDBY status).

• If a tape is not in the DVD/VCR or does not have a record

tab, ‘ ’ flashes and timer recording will not operate. Please

consumption.

1Press VCR, then DISC/VCR MENU.

2Press K/L to select “VCR SET UP”, then press B.

3Press K/L to select “CLOCK DISPLAY”, then press B.

4Select “OFF” (no clock display) or “ON” (clock display on) with B.

5To end, press STATUS/EXIT.

SELECT K L CHOOSE B

STATUS DISPLAY	[ON]
BLUE BACKGROUND [ON]
→ CLOCK DISPLAY	[ON]

END=EXIT

insert a recordable tape.

• When timer recordings are set, ‘ ’ will come on.To use the

DVD/VCR as usual until the time

for the recording, press TIMER SET so that ‘ ’ disappears.

Press VCR to choose VCR mode, then continue with the

other features as described in this manual.

Note:

- When all the programmed recording are finished, ‘ ’

will flash.

Selecting the sound channel

You can select the desired sound channel during playback or while receiving TV channels via the DVD/ VCR.This allows you to select a desired language for multi-language transmissions.

1Press AUDIO.This will show the current sound setting.

2Press AUDIO repeatedly until the desired setting appears in the display.

This is not a malfunction.

To use the DVD/VCR, press TIMER SET to turn off ‘ ’.

When the recording has been programmed in VCR mode,

“PRESS TIMER SET BUTTON FOR TIMER RECORDING” appears on the screen.

*Press TIMER SET button to start the programming.

Error message:“FULL”

• If this error message appears after you select “ONCE”,“DAILY”, or “WEEKLY” on TIMER menu and press B, then all TIMER blocks are already programmed. No more recordings can be programmed. If you want to clear or check a programmed recording (TIMER block), select the programme number on TIMER LIST menu and press CLEAR.

Switching the status display off or on

Along with the on screen menu, the status display also displays information on the current operating status (counter, playback, recording,TV channel, etc.) on the TV screen.You can switch off the information about the operating status so that the status display is not recorded when copying videocassettes.

• Reception of stereo broadcasts:

Mode	AUDIO OUTPUT		Display on
			the TV screen
Stereo	L	L Audio	STEREO
	R	R Audio
L	L	L Audio	LEFT
	R	L Audio
R	L	R Audio	RIGHT
	R	R Audio
Monaural	L	L+ R Audio	NONE
	R	L+ R Audio

• During playback of the recorded tape in Hi-Fi mode:

Mode	AUDIO OUTPUT		Display on
			the TV screen
Stereo	L	Hi Fi L Audio	STEREO
	R	Hi Fi R Audio
L	L	Hi Fi L Audio	LEFT
	R	Hi Fi L Audio
R	L	Hi Fi R Audio	RIGHT
	R	Hi Fi R Audio
Monaural	L	Normal Audio	MONO
	R	Normal Audio
	L	Hi Fi L Audio
		+ Normal Audio
MIX			MIXED

Hi Fi R Audio

R+ Normal Audio

•During reception of bilingual broadcasts:

Mode	AUDIO OUTPUT		Display on
			the TV screen
MAIN	L	Main Audio	MAIN
	R	Main Audio
SUB	L	Sub Audio	SUB
	R	Sub Audio
MAIN	L	Main Audio	MAIN
SUB	R	Sub Audio	SUB

13