DIGITAL TUNER
3.EQUALIZER
To adjust the bass, mid and treble frequencies press EQUALIZER once or more, then rotate VOLUME within 3 seconds to adjust each level.
=Display briefly shows | , | , or |
level |
| . |
Note: EQUALIZER can be used during TUNER, CD, USB PC LINK and GAME•AUX source.
4.GAMESOUND
To adjust the game sound, press GAMESOUND once or more to select your option.
=Display briefly shows | , | , |
or | . |
|
Note: GAMESOUND is only available when you play in GAME•AUX source.
How to MUTE the sound
1.Press MUTE on the remote control to interrupt sound reproduction instantly.
=Playback continues without sound and the
display flashes | . |
2.To reactivate sound reproduction you can:
–press MUTE again;
–adjust the volume controls;
–press 2; / 9 in CD / USB PC LINK source;
–change to another source.
DIGITAL TUNER (See 3)
Tuning to stations
1.Press STANDBY ON y to on, then press SOURCE once or more to select TUNER (or press TUNER once on the remote control).
=Display: shows 
briefly followed by waveband, frequency, and preset station number if already stored.
2.Press FM•AM once or more to select your waveband. (TUNER on the remote control)
3.Tuning to stations: you can tune to your stations manually or by automatic search tuning: Press down on ∞ or §I and release button when the frequency in the display starts running.
=The radio automatically tunes to a station of sufficient reception. Display shows 
DIGITAL TUNER
during automatic tuning.
4.Repeat step 3 if necessary until you find the desired station.
•To tune to a weak station, press ∞ or § briefly and repeatedly until you have found optimal reception.
To improve radio reception:
•For FM, extend, incline and turn the telescopic antenna. Reduce its length if the signal is too strong.
•For AM, the set uses a
Programming tuner stations:
You can store up to a total of 30 radio stations in the memory, manually or automatically (Autostore).
Autostore
Automatic programming will start from preset 1 or a chosen preset number. From this preset number upwards, former programmed tuner stations will be erased. The set will only program stations which are not in the memory already.
1.Press PRESET- or + once or more to select the preset number where programming should start. Note: If no tuner preset number is selected, default is preset 1 and all your presets will be erased.
2.Press PROG for 4 seconds or more to activate auto store programming.
= Display: 
is shown and available stations are programmed in order of waveband FM, followed by AM , the first preset station will then be played after all stations are stored automatically.
Manual programming
1.Tune to your desired station (see Tuning to stations).
2.Press PROG to activate programming.
=Display: PROG flashes.
3.Press PRESET
4.Press PROG again to confirm.
=Display: shows the preset number, waveband and the frequency of the preset station.