Heat Controller BDE-123, BD-101, BD-123, BDE-103, BD-81 manual Complaint Cause Remedy

Page 28

COMPLAINT

CAUSE

REMEDY

 

 

 

Compressor cycles

Voltage

Check the voltage. See the limits on the preced-

on overload.

 

ing page. If not within limits, call an electrician.

 

 

 

 

Overload

Check overload, if externally mounted.

 

 

Replace if open. (If the compressor temperature

 

 

is high, remove the overload, cool, and retest.)

 

 

 

 

Fan motor

If not running, determine the cause. Replace if

 

 

required.

 

 

 

 

Condenser air flow

Remove the cabinet. inspect the interior surface

 

restriction

of the condenser; if restricted, clean carefully

 

 

with a vacuum cleaner (do not damage fins) or

 

 

brush. Clean the interior base before

 

 

reassembling.

 

 

 

 

Condenser fins

If condenser fins are closed over a large area

 

(damaged)

on the coil surface, head pressures will increase,

 

 

causing the compressor to cycle. Straighten the

 

 

fins or replace the coil.

 

Capacitor

Test capacitor.

 

 

 

 

Wiring

Check the terminals. If loose, repair or replace.

 

Refrigerating system

Check the system for a restriction.

Insufficient cooling or

Air filter

If restricted, clean of replace.

heating

Exhaust damper door

Close if open.

 

 

 

 

Unit undersized

Determine if the unit is properly sized for the area to

 

 

be cooled.

Excessive noise.

Blower or fan

Check the set screw or clamp. If loose or missing,

 

 

correct. If the blower or fan is hitting air guide,

 

 

rearrange the air handling parts.

 

Copper tubing

Remove the cabinet and carefully rearrange tubing

 

 

not to contact cabinet, compressor, shroud, and

 

 

barrier.

 

 

 

— 28—

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Heat CONTROLLER, INC Contents PrefaceSpecifications For BD-81/BD-101Models RemarkFor BD-123 BD-123Items Models For BDE-103/BDE-123BDE-103 BDE-123 Features Control LocationsCooling only Model Operation VentilationCooling and Heating Model Operation Disassembly Instructions Mechanical PartsFront Grille CabinetORIFICE, Heater Assy and Turbo FAN AIR Handling Parts2 FAN Electrical Parts ShroudMotor CompressorRotary Switch Power CordThermostat Refrigeration Cycle CondenserEvaporator Capillary TubePage Pulling Vacuum Installation Installation RequirementsInstallation Hardware Electrical ServiceHOW to Install Items in Installation HardwareProcedure a Procedure B Top ViewTrim 2 ea Procedure C WallHigh Electrical Safety Electrical RequirementsElectrical Data for 115V Model USE of Extension CordsOutside Dimensions Troubleshooting GuidePiping System Troubleshooting Guide Fails to Start Complaint Cause Remedy Room AIR Conditioner Voltage Limits Name Plate Rating Minimum MaximumComplaint Cause Remedy Schematic Diagram Circuit DiagramModel BD-81/BD-101/BD-123 Description QTYModel BDE-103/BDE-123 Exploded View Model BD-81/BD-101/BD-123/BDE-103/BDE-123Replacement Parts List Model BD-81/BD-101Description Remark BD-81 BD-101Model BD-123 BD-123Model BDE-103/BDE-123 Heat CONTROLLER, INC

BD-81, BDE-123, BDE-103, BD-123, BD-101 specifications

The Heat Controller series, including the BD-123, BDE-123, BD-101, BDE-103, and BD-81 models, offers an impressive range of features and innovative technologies designed to provide efficient heating and cooling solutions for a variety of environments. Each model is engineered to stand out in performance, making them suitable for both residential and commercial applications.

The BD-123 model boasts an advanced Energy Efficiency Ratio (EER) that ensures users enjoy reduced energy consumption without compromising comfort. This unit is equipped with an intelligent temperature control system that adapts to the surrounding environment, optimizing heating or cooling as needed. Additionally, its sleek, modern design contributes to both aesthetics and functionality, making it an integral part of any space.

The BDE-123 enhances the functionality of the BD-123 by incorporating smart connectivity options. Users can control the temperature of their space remotely via smartphone applications, allowing for greater convenience and energy management. Furthermore, this model features a filter reminder system that alerts users when it’s time for maintenance, prolonging the unit's lifespan and ensuring peak performance.

The BD-101 model is designed with an emphasis on compactness and versatility. Its lightweight structure allows for easy installation in small spaces, making it ideal for apartments and small offices. With multi-speed fan settings, this model provides customizable airflow, catering to individual preferences and requirements.

The BDE-103 enters the market as a top-tier option, featuring advanced inverter technology. This innovative approach significantly reduces power consumption while maintaining consistent temperature control. The BDE-103 also prides itself on quiet operation, allowing users to enjoy a peaceful atmosphere without the disruptive noise often associated with traditional systems.

Lastly, the BD-81 is tailored for users seeking affordable yet reliable heating and cooling solutions. Despite its lower price point, it does not compromise on quality, offering essential features such as adjustable thermostats and programmable timers. This model makes it accessible for budget-conscious users while still providing comfort and efficiency.

In summary, the Heat Controller BD-123, BDE-123, BD-101, BDE-103, and BD-81 models cater to a variety of needs. With a combination of energy efficiency, smart technology, compact design, and affordability, these models are designed to ensure optimum comfort in any setting while prioritizing user convenience and sustainability. Whether for a small apartment or a large commercial space, there is a Heat Controller model that meets the demands of modern living.
Top Page Image Contents