Graco 239-327, Series A manual Injection Hazard, Moving Parts Hazard

Page 3
INJECTION HAZARD

MOVING PARTS HAZARD WARNING

INJECTION HAZARD

Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.

DFluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate medi- cal attention.

DDo not point the gun at anyone or at any part of the body.

DDo not put your hand or fingers over the spray tip.

DDo not stop or deflect leaks with your hand, body, glove or rag.

DDo not ªblow backº fluid; this is not an air spray system.

DAlways have the tip guard and the trigger guard on the gun when spraying.

DCheck the gun diffuser operation weekly. Refer to the gun manual.

DBe sure the gun trigger safety operates before spraying.

DLock the gun trigger safety when you stop spraying.

DFollow the Pressure Relief Procedure on page 8 whenever you: are instructed to relieve pres- sure; stop spraying; clean, check, or service the equipment; and install or clean the spray tip.

DTighten all fluid connections before operating the equipment.

DCheck the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose.

DUse only Graco approved hoses. Do not remove any spring guard that is used to help protect the hose from rupture caused by kinks or bends near the couplings.

MOVING PARTS HAZARD

Moving parts, such as the air motor piston, can pinch or amputate your fingers.

DKeep clear of all moving parts when starting or operating the pump.

DBefore servicing the equipment, follow the Pressure Relief Procedure on page 8 to prevent the equipment from starting unexpectedly.

3￿8￿739 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rev. A INSTRUCTIONS-PARTSLIST308±739 Part No. 239±327, Series ACaution Symbol Table of ContentsSymbols Warning SymbolMOVING PARTS HAZARD INJECTION HAZARDTOXIC FLUID HAZARD FIRE AND EXPLOSION HAZARDMounting the Pump InstallationPrepare the Operator Prepare the SiteInstallation Typical InstallationInstallation System AccessoriesFlush the Pump Before First Use Pressure Relief ProcedureStarting and Adjusting the Pump OperationCOMPONENT RUPTURE HAZARD Shutdown and Care of the PumpFlushing the Pump OperationCause TroubleshootingProblem SolutionService Disconnecting the Displacement PumpReconnecting the Displacement Pump Part No. 239±327, Series A Partssee manual 307±043 see manual 306±981Dimension DimensionsMounting Hole LayoutTechnical Data Sound Power Levels dBatested in accordance with ISO 9614±2 bar, MPa Performance Chart308739 Technical DataThe Graco Warranty and Disclaimers Graco Phone Number1±800±367±4023 Toll Free
Related manuals
Manual 16 pages 16.31 Kb Manual 16 pages 33.83 Kb Manual 22 pages 27.05 Kb Manual 4 pages 61.61 Kb

239-327, Series A specifications

Graco is a renowned manufacturer known for its high-quality spray equipment and pumps, catering to both professionals and DIY enthusiasts. Their diverse lineup includes advanced models such as Series A, Series C, Model 237069, Model 289310, and Model 238620, each uniquely engineered to meet various painting and coating applications.

The Graco Series A is an outstanding choice for smaller projects. Its lightweight design and portability make it ideal for residential touch-ups, woodworking, and other small-scale applications. This series boasts a simple setup with an easy-to-use spray gun that enables users to achieve a smooth, even finish. Equipped with Graco’s ProConnect technology, Series A allows for quick pump replacement without any tools, ensuring minimal downtime during projects.

The Graco Series C offers enhanced performance and greater versatility for larger applications. This series is designed for professional contractors and serious DIYers, featuring robust construction and advanced technology. With a higher flow rate and pressure capabilities, Series C can handle more demanding projects such as residential and commercial buildings. Additionally, it incorporates SmartControl technology, electronically controlling pressure to provide consistent spray patterns regardless of the fluid being used.

Model 237069 is another exceptional option known for its compact design and efficiency. This electric airless sprayer is perfect for various interior and exterior applications, standing out due to its ease of operation. It features a reversible spray tip, allowing users to quickly clear clogs, and the adjustable pressure settings provide flexibility for different surface textures. Model 237069 is engineered for durability, making it a reliable choice for frequent use.

Model 289310 is engineered for professionals who prioritize speed and precision. This heavy-duty sprayer is equipped with an advanced hydraulic system, which ensures a consistent flow of material. Its larger hopper capacity minimizes the need for frequent refills, allowing users to complete extensive projects faster. Furthermore, the model includes an ergonomic design that reduces fatigue, empowering operators to work longer with comfort.

Lastly, Model 238620 exemplifies Graco’s commitment to innovation in airless technology. This model features an integrated digital display that offers real-time feedback and monitoring, enhancing overall user experience. With its streamlined pump design and advanced filter system, Model 238620 is capable of handling a wide range of coatings, from thin stains to thick latex paints.

In conclusion, Graco's Series A, Series C, Model 237069, Model 289310, and Model 238620 represent the brand’s dedication to quality, performance, and user-friendliness. These models cater to various project sizes and requirements, making them valuable assets for both amateurs and seasoned professionals in the painting industry.
Top Page Image Contents