Graco P40RCM, P39LCS For D200s, D200, D60, and S20 Air Controls, D200s, D200,D60, and S20 Systems

Page 13

 

 

 

 

 

Prime/Flush

Prime/Flush

Start Up and Adjust Pump

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The pump is tested with lightweight oil, which is left in to protect the pump parts. If the fluid you are

using may be contaminated by the oil, flush it out with a compatible solvent before using the pump.

Flush with a fluid that is compatible with the fluid you are pumping and with the wetted parts in your system. Check with your fluid manufacturer or supplier for rec- ommended flushing fluids and flushing frequency. Always flush the pump before fluid dries on the displace- ment rod.

CAUTION

Never leave water or water-based fluid in a carbon steel pump overnight. If you are pumping a water-based fluid, flush with water first. Then flush with a rust inhibitor, such as mineral spirits. Relieve pressure, but leave rust inhibitor in pump to protect parts from corrosion.

1.Follow Pressure Relief Procedure on page 12.

2.Remove the spray tip/nozzle from the gun/valve.

3.Hold a metal part of the gun/valve firmly to the side of a grounded metal pail.

4.Start the pump. Always use the lowest possible fluid pressure when flushing.

5.Trigger the gun/valve.

6.Flush the system until clear solvent flows from the gun/valve.

7.Relieve the pressure.

Keep hands and fingers away from the priming piston during operation and whenever the pump is charged with air. The priming piston extends beyond the intake housing to pull material into the pump and can ampu- tate a hand or finger caught between it and the intake housing. Follow the Pressure Relief Procedure on page 12 before checking, clearing, or cleaning the priming piston.

1.Supply fluid to the pump, per the requirements of your system.

2.Be sure the pump air regulator is closed.

3.For D200s, D200, D60, and S20 Air Controls:

a.Set ram air regulator to about 50 psi (3.5 bar).

b.Set the ram director valve to down.

Air Motor Valve

Air Motor Regulator

Ram Director Valve

Ram Air Regulator

ti10438a

FIG. 9: D200s, D200,D60, and S20 Systems

312376L

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents P20LCM Model Shown P39LCS Model Shown P40RCM Model Shown Check-MatePump PackagesRelated Manuals ContentsModels Skin Injection Hazard Equipment Misuse Hazard CM14BA Model Shown Component Identification, Supply Unit InstallationKey CM7B1G Model Shown Component Identification, Typical Installation Grounding InstallationMounting Accessories System AccessoriesAir Line Accessories Fluid Line AccessoriesFollow Pressure Relief Procedure on SetupDisplacement Pump Torque Wet CupFor D200s, D200, D60 and S20 Air Controls See FIG Pressure Relief ProcedureD200s, D200,D60, and S20 Systems For D200s, D200, D60, and S20 Air ControlsL20c Air Controls For L20c Air ControlsShutdown Follow Pressure Relief Procedure,Overnight Shutdown For D200s, D200, D60, and S20 Supply SystemsProblem Cause Solution TroubleshootingTroubleshooting Repair Disconnect Displacement PumpRequired Tools Ti10508a Reconnect Displacement Pump Repair 312376L Reed Switch Assembly Pump Package Parts ListParts NXT200, NXT400, NXT700, NXT1200, and NXT1800 Air MotorsModel P40RCM Shown NXT2200, NXT3400, and NXT6500 Air MotorsAdapter Bracket 15M222 Model P39LCS ShownCommon Parts Pump Packages with L060xx Displacement PumpsVarying Parts P20SCS Ref. Part Description Qty Pump Packages with L100xx Displacement PumpsCoupling Cover Hairpinw Bracket Pump Packages with L200xx Displacement PumpsTie Rod Assy Coupler Lanyard Adapter Coupling Pump Packages with L250xx Displacement PumpsRod Assy Coupler Nut Pump Packages with L500xx Displacement PumpsTie Rod Coupling Pump Packages with NXT 2200, NXT 3400, NXT 6500 Air Motors DimensionsPump Package Dimensions Displacement Flow Rate gpm lpm Technical DataCalculate Fluid Outlet Pressure Performance ChartsCalculate Pump Air Flow/Consumption Key Air PressurePsig MPa, bar Cycles/min Fluid Pressure in psig MPa, bar Air Air Flow in Scfm m3/min Bar Cycles/min MPa, bar Performance Charts 312376L Graco Information Graco Standard Warranty

P40RCM, P39LCS, P20LCM specifications

Graco, a renowned brand in the world of fluid handling equipment, has developed a series of versatile and high-performance products tailored for various applications. Among these, the Graco P20LCM, P39LCS, and P40RCM stand out for their innovative features, technologies, and characteristics that enhance productivity and efficiency in professional environments.

The Graco P20LCM is a lightweight and portable paint sprayer designed for small to medium-sized projects. It features Graco’s exclusive ProConnect technology, which allows for quick and easy pump replacement, minimizing downtime. The P20LCM also incorporates a SmartControl system that provides consistent pressure and prevents overspray for a flawless finish. Its flexible suction tube allows for drawing paint directly from a bucket, while its compact design ensures ease of transport, making it ideal for contractors and DIY enthusiasts alike.

In contrast, the Graco P39LCS embodies a robust solution tailored for larger projects. This airless paint sprayer is engineered for high efficiency, capable of handling thicker coatings with ease. It boasts a powerful hydraulic system that maintains pressure, ensuring an even application over large surfaces. The P39LCS integrates the Grip and Guard with LED indicators, enhancing user experience and safety. Additionally, its durable construction and advanced filtration system help in prolonging the lifespan of the equipment, reducing maintenance requirements and downtime.

The Graco P40RCM is an advanced model that offers unrivaled versatility and control, making it a preferred choice for professional contractors. This sprayer features advanced electronic controls that enable users to adjust pressure settings on the fly, offering ultimate control over the application process. The P40RCM is compatible with a wide range of coatings, including paints, stains, and sealants, providing flexibility for diverse job needs. Its AutoPrime technology simplifies the priming process, allowing for faster setup and minimal manual intervention. Furthermore, rugged wheels and a durable frame enhance maneuverability and resilience on job sites.

Together, the P20LCM, P39LCS, and P40RCM encapsulate Graco’s commitment to quality and innovation. With user-friendly features, advanced technologies, and robust designs, these products are engineered to meet the demands of professionals and improve efficiency while delivering superior results in every application.
Top Page Image Contents