Philips EXP 4118 quick start Troubleshooting

Page 12

TROUBLESHOOTING

WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.

If a fault occurs, first check the points listed before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre.

No power, or playback does not start

Insert the battery correctly.

Replace the battery.

.• Connect the mains adapter securely.

HoLd indication and/or no reaction to controls

• Deactivate HOLD.

No sound or bad sound quality

Press 2; to resume playback.

Adjust the volume.

The track is a data file. Press § to skip to the next audio CD track.

Check and clean the LINE OUT/p connections.

Keep this set away from active mobile phones or strong magnetic fields.

no cd indication

Insert a disc, label upwards.

Clean or replace the disc.

Wait until the steamed up lens has cleared.

nF dISC indication

• Make sure the inserted CDR(W) is finalized.

dAtA indication

• Make sure you have inserted an audio disc or an MP3-CD.

TROUBLESHOOTING

Prot indication and music file is not played

The music file is protected. Make sure the protection option in your encoder software is deactivated when creating a music file.

In this case you are responsible for adherenceto all local or international copyrights.

SELECt indication

• Select tracks for programming before you play your program.

Music file is not played

Wrong format used eg. VCD, word. Make sure the music file names end with mp3

Missing directories on MP3-CD

Make sure the total number of files and albums on your MP3-CD does not exceed 350.

Only albums with MP3 files are shown.

The disc skips tracks

Clean or replace the disc

Make sure REPEAT, REPEAT ALL, SHUFFLE, SHUFFLE ALL or PROGRAM is switched off.

Music is skipped or popping sound when playing an MP3 file

If the problem persists, encode the audio track again and make a new CD- ROM.

CD damaged or dirty. Replace or clean CD.

Music is interrupted and OOPS indication

• Switch ESP on.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Image 12
Contents Cm Portable MP3-CD Player Cm Portable MP3-CD Player Meet Philips at the InternetPage Quick Start Maintenance Controls see figureGeneral Information Environmental informationHow to get music files How to organize music filesHow to make a CD-ROM with MP3 MP3 music filesPower Supply Power SUPPLY/HEADPHONESHeadphones Playing Enhanced Music CDs and Mixed Mode Basic FunctionsPlaying a disc Press 2to start playbackVolume and sound Volume adjustment Adjust the volume by using VOL ESound adjustment Remote Control Supplied or Optionally AvailableFeatures Selecting different playback possibilities-MODE ESP-Electronic Skip ProtectionBeep sound Troubleshooting