Philips EXP 4118 Basic Functions, Playing a disc, Playing Enhanced Music CDs and Mixed Mode

POWER SUPPLY/HEADPHONES

IMPORTANT!

•Hearing safety : Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing.

•Traffic safety : Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.

BASIC FUNCTIONS

Playing a disc

With this set you can play –all pre-recorded audio CDs –all finalized audio CDR(W)s

BASIC FUNCTIONS

5To remove the disc, hold it by its edge and press

the hub gently while lifting the disc.

Note: After pressing 2;it may take some time until the first MP3 track is played.

Playing Enhanced Music CDs and Mixed Mode

CDs

On Enhanced Music CDs and Mixed Mode CDs there are audio CD tracks as well as computer data (e. g. text files, pictures, MP3 files,…).

1Insert the disc and press 2;to start playback.

yC d rEAd is displayed. Playback starts. All audio CD tracks will be played.

–MP3-CDs (CD-ROMs with MP3 )

1 Push the OPEN 2 slider to open the CD lid.

2Insert a disc, printed side up, by pressing gently on the disc´s centre so that it fits onto the hub. Close the lid by pressing it down.

3Press 2;to start playback.

. yCd rEAd is displayed. Playback starts. Audio disc: The current track number and the elapsed playing time are displayed.

MP3-CD: MP3 is shown. The current album number, track number and the elapsed playing time are dis- played.

4Press 9 to stop playback.

yAudio disc: The total number of tracks and the total playing time of the disc are displayed.

yMP3-CD: The total number of albums and tracks are displayed.

Note : If the total number of album is more than 9, the display will show “− ”; if the total number of tracks is more than 99, the display will show “− − ”.

2If there are MP3 and AAC files on the disc, MP3 blinks. Keep MODE pressed for 2 seconds to select MP3 playback.

yCd rEAd is displayed. Playback starts with the first track of the first album. All MP3 will be played.

3To return to audio CD playback, keep MODE pressed for 2 seconds.

Note:To protect your headphones and your Hi-Fi system from damage, you will hear no sound when a computer (data) file is played. Press § to skip to the next track.

Pause

1Press 2; to interrupt playback.

yThe time where playback was interrupted will blink.

2To resume playback press 2; again.

TITLE MP3

ALBUM TITLE