Preparations
FM wire antenna
AM loop antenna
AC power adaptor
Rear connections | B Antennas Connection |
English
The type plate is located at the bottom of the system.
APower
●Before connecting the AC power adaptor to the wall outlet, ensure that all other connections have been made.
WARNING!
–Use the supplied AC power adaptor only! Using any other power connection device may damage your main set!
–For optimal performance, use only the original AC power adaptor.
–Never make or change connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
AM Antenna
Polarity insensitive
●Position the antenna as far as possible from a TV, VCR or other radiation source.
9