Use method, System structure | Haier PJF1- 120, PJF1- 150W manual

Use method

press more than one second, the adjusted parameter will decrease

progressively 3 numbers every second.). The adjusting clock can be set in clock column, the preset time can be set in fixing time column, the heating temperature can be set in fixing temperature column, and the temperature difference can be set in temperature differencecolumn. Confirming of the

System structure

Metal pipe: ( copper or corrugation pipe)

	Exhaust valve
Water-entering opening	Tee joint

setting of each parameter can be done by pressing the setting key or by not

Vacuum tube Collector

Water-exiting opening

pressing the setting key about 6 seconds.Then the system will automatically confirm and automatically enter the next parameter setting, until the system finally withdraws from the set conditions and returns to the conditions of the previous clock. The set order of parameter in specific modes is as follows:

Water-exiting pipe

Single direction valve Outdoors

Indoors

Hot water outlet

Solar energy heating mode:

Indicating clock condition---to set heating temperature in fixing temperature-

--indicating clock condition. For example: temperature difference value

setting of water pump running: to press the setting key to enter the setting

condition of temperature difference of water pump running. The indication

board indicates the present set value (the first place on the left of the clock

Metal or PPR pipe

Pump

Line-controlling equipment

Water-storing tank

number tube indicates L, and the following two places indicate the tacitly

approved set	value, which is 10 ). To press	V to select
between 10	and 6 . For the indication interface, see Fig.8.

Simultaneous heating mode:

I n d i c a t i o n c l o c k c o n d i t i o n - - t o s e t h e a t i n g t e m p e r a t u r e i n f i x e d temperatureindication clock condition

Preset heating mode:

Indicating clock condition--to set hour of the first preset heating time in fixing


time	--to set minute of the first preset heating time in fixing time			-
-to set temperature of preset heating in fixing temperature			-- to set
hour of the second preset heating time in fixing time		-- to set minute of
the second preset heating time in fixing time		---to set temperature of
the second preset heating in fixing temperature		---indicating clock

condition. For example: to set the temperature of the first preset heating, and for the indication interface,see Fig. 9.

Intellectual heating mode:

Indicating clock condition---to set temperature of heating in fixing temperature column--- indicating clock condition.

Note:after the set (tacitly approved) information is confirmed, the machine will automatically store it and customers can select the present working mode according to their practical necessity. Only when the present working mode is selected, can the corresponding set content be carried out.

Safety valve

Cold water inlet

Fig.1 BRF1-120/150W structure sketch map

Metal pipe: ( copper or corrugation pipe)

Exhaust valve

Tee joint

Water-exiting opening

Water-exiting pipe

Single direction valve

Outdoors

Indoors

Hot water outlet

Metal or PPR pipe

Flat collecter

Line-controlling equipment

Water-storing tank

Pump

Safety valve

Cold water inlet

Fig.2 PJF1-120/150W structure sketch map

PJF1- 150W, BRF1- 150W, BRF1- 120, PJF1- 120 specifications

Haier has made significant strides in the home appliance sector, especially with its innovative water heater models: the PJF1-120, BRF1-120, BRF1-150W, and PJF1-150W. These models are designed to cater to various consumer needs while ensuring efficiency and reliability.

The Haier PJF1-120 features a compact design ideal for small to medium-sized households. With a capacity of 120 liters, it ensures an ample supply of hot water for daily needs. It incorporates advanced insulation technology which minimizes heat loss, thereby improving energy efficiency. The PJF1-120 is also equipped with a digital thermostat, allowing users to set their desired temperature accurately. This model's eco-friendly design not only resonates with modern environmental standards but also aids in reducing utility costs.

Conversely, the BRF1-120 boasts advanced safety features, including a multi-function safety valve. This ensures protection against overpressure and overheating, critical aspects for worry-free use. It also features a durable build, crafted with high-quality materials that guarantee longevity and resist corrosion. The BRF1-120 caters to users looking for both functionality and safety without compromising on performance.

The BRF1-150W is an upgraded model that caters to larger families or settings requiring a higher hot water output. With a capacity of 150 liters, it meets increased hot water demands while maintaining efficiency. This model has a wireless control feature, facilitating remote operation via a smartphone application. Users can monitor their water temperature and schedule heating times conveniently, enhancing the overall experience.

Lastly, the PJF1-150W combines the best of both worlds, offering both high capacity and innovative technology. The smart controls and robust heating elements ensure that hot water is always available. The PJF1-150W also incorporates a unique anti-scale technology which prolongs the lifespan of the heating elements, providing durability even in hard water conditions.

In summary, Haier’s range of water heaters including the PJF1-120, BRF1-120, BRF1-150W, and PJF1-150W highlights the brand’s commitment to quality and innovation. With a focus on energy efficiency, safety, and user-friendly technology, these models are poised to set a benchmark in modern water heating solutions, making them a worthwhile investment for any household.