Philips SA2200 Connect, Insert the battery, Read the battery level indication of your player

2Follow the on-screen instructions to complete the installation of Philips Device Manager.

3If the installation program does not start automatically, browse the CD contents with Windows Explorer and run the program by double clicking on the file ending with .exe.

Lost your CD? Don’t worry, you can download the CD contents from www.philips.com/support or www.philips.com/usasupport (for U.S. residents).

3.3 Connect

3.3.1 Insert the battery

1Remove the USB cap.

2Remove the battery door by sliding it in the direction of arrow.

3Insert the supplied AAA battery into the battery compartment.

3.3.2 Read the battery level indication of your player

The approximate power levels of your battery are indicated as follows:

Full Two-thirds full Half full Low Empty

Note When the batteries are almost empty, the low battery screen blinks. Your player will power down in less than 60 seconds. Your player will save all settings and un- finished recordings before it powers down.

10