Technical data | Philips SA2200 specification

6 Technical data

Power

• Power supply: AAA alkaline battery*

Display

•Picture / Display: Mono display, 32 x 128 pixels

Sound

•Channel separation: 35dB

•Equalizer settings: Rock / Jazz / Pop / Classical / Off

•Frequency response: 80-18000Hz

•Signal to noise ratio: > 80dB

•Output Power (RMS): 2x3mW

Audio Playback

•Compression format: MP3 (8-320 kbps

and VBR; Sample rate: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48kHz), WMA (64-320kbps)

•ID3-tag support: Song title and artist name

Recording

•Audio Capturing: Built-in microphone (Mono)

Storage Media

•Built-in memory capacity: SA220X 512MB NAND Flash + SA221X 1GB NAND Flash + SA222X 2GB NAND Flash +

Connectivity

• Headphone 3.5mm, USB 2.0++

Music transfer

• Drag and drop in Windows Explorer

*Battery life vary by use and settings.

System Requirements

•Windows® ME, 2000 or XP

•Pentium Class 300MHz processor or higher

•128MB RAM

•500MB hard disk space

•Internet connection

•Microsoft Internet Explorer 6.0 or later

•Video display card

•Sound card

•USB port

+1MB = 1 million bytes; available storage capacity will be less. 1GB = 1 billion bytes; available storage capacity will be less.

Full memory capacity may not be available as some memory will be reserved for the player. Storage capacity based on 4 minutes per song and 64kbps WMA encoding.

++ Actual transfer speed may vary based on your operating system and software configuration.