FM stations with RDS
Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations.
If you listen to a FM station with RDS signal, “RDS” displays.
Display RDS information
1Tune to the desired RDS radio station on the FM waveband.
2Press RDS/DISPLAY on the remote control repeatedly to switch through the following information (if available):
•Radio text message
•Program type (for example: News, Sport...)
•Frequency
•Stereo/Mono Mode
•Time
•Date
Note
•[NO Radio Text], [NO PTY], [NO Name], [Mono], [00:00:00] or
Set RDS clock
You can use time signal broadcast together with the RDS signal to set the clock of the unit.
1Tune to a RDS radio station that transmits time signals.
2Press and hold MENU.
» [CLK Sync] is displayed.
Note
•The accuracy of the transmitted time depends on the RDS station that transmits the time signal.
Reset to factory setting
1In DAB/FM mode, press MENU to enter the menu options.
2Press/ repeatedly until [System] displays on the display panel.
3Pressto access the system menu.
» [Factory Reset] displays.
4Pressto enter factory reset menu.
»The display panel shows options [Yes] and [No] under [Factory Reset].
5Press/ to select [Yes].
6Pressto confirm the DAB/FM factory reset.
20EN