8 Other features
Set the sleep timer
This docking system can switch to standby automatically after a set period of time.
1When the unit is turned on, press TIMER repeatedly to select a set period
»When sleep timer is activated,
is displayed.
To deactivate sleep timer |
|
1 Press | repeatedly until |
[ |
|
»When sleep timer is deactivated,
disappears.
Press
»The alarm timer is set and activated.
Activate and deactivate the alarm timer
In standby mode, press
repeatedly to activate or deactivate the alarm timer.
»If the alarm timer is activated,
is displayed
»If the alarm timer is deactivated,
disappears.
Note
If CD/USB/iPod/iPhone/iPad source is selected, but no disc is placed or no USB/iPod/iPhone/ iPad is connected, the FM TUNER is selected automatically.
English
Set the alarm timer
This docking system can be used as an alarm clock.You can select CD, FM TUNER, iPod/ iPhone/iPad, or USB as alarm source.
Note
Ensure that you have set the clock correctly.
1In standby mode, press and hold TIMER until [SET TIMER scrolls on the display.
2Press CD, USB, DOCK, or TUNER to select a source.
3Press
»The hour digits are displayed and begin to blink.
4Press 
/ 
to set the hour, and then
pressagain.
»The minute digits are displayed and begin to blink.
5 Press 
/ 
to set the minute.
You can also listen to an external audio device through this docking system.
1 Press | to select MP3 link |
source. |
|
2Connect the supplied MP3 link cable to:
thejack on the back of the unit
the headphone jack on the device
3Start to play the device. (See the device
EN 17