Philips DCM250/37 user manual Connect power, Prepare the remote control

Open the battery compartment.

Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

Close the battery compartment.

EN

Connect power 3 Connect the other end to the wall socket.

Caution

•• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.

•• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.

•• Before connecting the AC power cord, ensure you have completed all other connections.

E n g l i s h

Note

•• The type plate is located on the bottom of the main unit.

1 Connect the power cord to the AC adaptor.

2 Connect one end to the DC socket on the main unit.

Prepare the remote control

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

For first-time use:

1 Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1

2

3

13