10 Other features
Set the sleep timer
This DCM250 can switch to standby automatically after a set period of time.
1 When the DCM250 is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
»» When sleep timer is activated, the display shows [SLEEP](sleep) 
.
To deactivate sleep timer
1 Press SLEEP repeatedly until “OFF” is displayed.
»» When sleep timer is deactivated, [SLEEP](sleep) 
disappears on the display.
Set the alarm timer
This DCM250 can be used as an alarm clock. The DISC,TUNER, USB or iPod is activated to play at a preset time.
1
2
3
4
5 Press 
/ 
to set the hour.
6 Press TIMER to confirm.
»» The minute digits are displayed and begin to blink.
7 Press 
/ 
to set the minute.
8 Press TIMER to confirm.
»» The timer is set and activated.
Activate and deactivate the alarm |
|
timer | h |
1 Press TIMER repeatedly to activate or | E n g l is |
deactivate the timer. |
|
»» If the timer is activated, the display |
|
shows . |
|
»» If the timer is deactivated, 
disappears on the display.
Note
•• If DISC/USB/iPod source is selected and the track cannot be played, tuner is activated automatically.
Listen to an external device
You can also listen to an external audio device through this unit.
1 Press AUX to select MP3 link source.
2 Connect the supplied MP3 link cable to:
• the MP3 LINK jack on this unit
• the headphone jack on the device
3 Start to play the device. (See the device user manual)
Listen through headphone
1 Plug a headphone into the 
socket on the unit.
EN 23