10Use more of your Docking Entertainment System
Set the sleep timer
This DCM250 can switch to standby automatically after a set period of time.
1When the DCM250 is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
»When sleep timer is activated, the display shows [SLEEP](sleep)
.
To deactivate sleep timer
1Press SLEEP repeatedly until “OFF” is displayed.
»When sleep timer is deactivated, [SLEEP](sleep)
disappears on the display.
Set the alarm timer
This DCM250 can be used as an alarm clock. The DISC,TUNER, USB or iPod is activated to play at a preset time.
1Ensure that you have set the clock correctly.
2Press and hold TIMER.
3Press CD, USB, TUNER or iPod to select a source.
4Press TIMER to confi rm.
»The hour digits are displayed and begin to blink.
5Press
/
to set the hour.
6Press TIMER to confi rm.
»The minute digits are displayed and begin to blink.
7Press
/
to set the minute.
8Press TIMER to confi rm.
» The timer is set and activated.
Activate and deactivate the alarm timer
1Press TIMER repeatedly to activate or deactivate the timer.
»If the timer is activated, the display shows 
.
»If the timer is deactivated, 
disappears on the display.
Note
•If DISC/USB/iPod source is selected and the track cannot be played, tuner is activated automatically.
Listen to an external device
You can also listen to an external audio device through this DCM250.
1Press AUX to select AUX source.
2Use the AUX cable to connect AUX jack (3.5mm) on this DCM250 and the headphone jack on the player.
24EN