
Connect RAGA to a computer
1 Connect the USB plug of the supplied USB cable to a spare USB port on your computer.
2 Connect the small USB plug of the USB cable to the small USB jack on RAGA.
3 Turn on your computer. »» RAGA charges.
Install Philips Songbird for the first time
When you connect RAGA to the PC for the first time, a
1
2
Note
•• The installation requires you to agree to the license terms.
If the
1
2
3
4
Note
•• The installation requires you to agree to the license terms.
Battery level indication
The display indicates the approximate levels of the battery status as follows:
100% 75% 50% 25% 0%
»» A flashing battery screen indicates that the battery is low.The player saves
all settings and switches off within 60 seconds.
Note
•• Rechargeable batteries have a limited number
of charge cycles. Battery life and number of charge cycles vary by use and settings.
•• The charging animation stops and the ![]()
icon is displayed when the charging process is completed.
Tip
•• You can conserve battery power and increase the play time of RAGA if you go to
> [Display Settings] > [Screen off timer] and ensure that the shortest timer setting is selected.
Software loaded on the
RAGA
RAGA comes with the following software:
•Philips Songbird (helps you update the firmware of RAGA and transfer your media files).
Files loaded on the RAGA
The following files are loaded on RAGA:
•User Manual
•Frequently Asked Questions
•Safety and warranty information
•Worldwide warranty information
8EN