Philips DC290/12 Listen to radio, Tune to a radio station, Program radio stations automatically

Page 11

5 Listen to radio

Note

Only FM radio reception is available on this unit.

Tune to a radio station

Tip

Position the antenna as far as possible from TV, VCR or other radiation source.

Note

For optimal reception, fully extend and adjust the position of the antenna.

1Press TUNER to select FM tuner.

2 Press and hold / for more than 2 seconds.

»[Srch] (search) is displayed.

»The radio tunes to a station with strong reception automatically.

3Repeat step 2 to tune to more stations.

To tune to a weak station, press / repeatedly until you find optimal reception.

Program radio stations automatically

You can program a maximum of 20 preset radio stations.

1In the tuner mode, press and hold SET TIME/PROG for more than 2 seconds to activate automatic program mode.

»[AUTO] (auto) is displayed.

»All available stations are programmed in the order of waveband reception strength.

»The first programmed radio station is broadcast automatically.

Program radio stations manually

You can program a maximum of 20 preset radio stations.

1Tune to a radio station.

2Press SET TIME/PROG to activate the program mode.

3Press/ to select a number.

4Press SET TIME/PROG to confirm.

5Repeat the above steps to program other stations.

Tip

To overwrite a programmed station, store another station in its place.

Select a preset radio station

1 Press / to select a preset number.

12EN

Image 11
Contents Register your product and get support at DC290 Contents Important Safety Instructions SafetyEnvironmental information RecyclingWhat’s in the box IntroductionC d e f Overview of the main unitOverview of the remote control Get started Install batteriesTurn on Connect powerSwitch to standby Set time and datePlay from an external device PlayPlay from iPod/iPhone Program radio stations automatically Select a preset radio stationListen to radio Tune to a radio stationSet the alarm timer Other featuresAdjust sound Specifications Product informationTroubleshooting