Other features, Set the alarm timer | Philips DC290/61, DC290/12

6 Other features

You can set two alarms which go off at different time.

1Ensure that you have set the clock correctly. (See “Get started - Set time and date”.)

2 Press and hold ALM 1 or ALM 2 for 2 seconds.

»[AL 1] or [AL 2] begin to blink.

3Press SOURCE on the top panel to select an alarm sound source: iPod/iPhone, FM tuner, or buzzer.

4Press ALM 1 or ALM 2.

» The hour digits begin to blink.

5Press/ repeatedly to set the hour.

6Press ALM 1 or ALM 2 to conﬁrm. » The minute digits begin to blink.

7Repeat steps 5-6 to set the minute.

8Repeat steps 5-6 to select whether to ring alarm the whole week, on weekdays, or at weekend.

9Repeat steps 5-6 to set the alarm volume.

Tip

•If you set iPhone/iPod playlist as the sound source, you must create a playlist in iTunes called “PHILIPS” and import it to your iPhone/ iPod.

•If no playlist is created in the iPod/iPhone or there is no song in the playlist, the unit will wake to songs in the iPod/iPhone.

	1 Press ALM 1 or ALM 2 repeatedly to	English
	activate or deactivate the timer.	English
	activate or deactivate the timer.
	» If the timer is activated, [ AL 1] or
	[ AL2] is displayed.

» If the timer is deactivated, [ AL1] or [ AL2] disappears.

1When the alarm rings, press

» The alarm repeats ringing minutes later.

Tip

• You can press / to adjust the interval to repeat alarm.

1When the alarm rings, press the corresponding ALM 1 or ALM 2.

»The alarm stops but the alarm settings remain.

View the alarm settings

1Press ALM 1 or ALM 2.

EN 13