Philips AD7000W user manual Update firmware, Download the update file

Page 21

6Update firmware

Note

•• You can only update the firmware from a PC/Mac.

Download the update file

www.philips.com/support

XXXX

XXXX. zip

1On your PC/Mac, go to www.philips.com/ support.

2Enter the model number to find the latest firmware upgrade file available.

3Save and unzip the upgrade file to your hard drive.

Update from the configuration page

Warning

•• Always connect your AD7000W to AC power for firmware upgrade. Never power off your AD7000W during firmware upgrade.

Note

•• To use an Internet browser other than Apple Safari on your PC/Mac, remember to go to the Wi-Fi router configuration page and write down the IP address of your AD7000W. See the user manual of your Wi-Fi router for how to find the IP addresses of devices connected to the Wi-Fi router.

1Power on AD7000W.

»»It takes about 35 seconds for the unit to boot up. During boot-up, the WI-FI SETUP indicator on the back of the unit blinks green quickly.

»»After boot-up, you can hear a beep and the WI-FI SETUP indicator turns to green steadily. AD7000W is connected to the last configured Wi-Fi network automatically.

2Make sure that AD7000W and your PC/ Mac are connected to the same Wi-Fi router.

3Open Apple Safari on your PC/Mac, then select 'Philips_Fidelio XXX' from the

Bonjour pull-down list.

• Or open any other Internet browser on your PC/Mac, then type in the IP address of AD7000W (available on the

Wi-Fi router configuration page) at the address bar.

»»The AD7000W configuration web page is displayed.

EN 19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Register your product and get support at Always there to help youPage Contents Information for Europe Know these safety symbols SafetyDo not remove the casing of this product Shall remain readily operableEnvironmental information Mains fuseClass II equipment symbol Whats in the box IntroductionWhat else you need Model No Serial NoOverview of the main unit Get started to use AirPlayList of compatible iTunes host devices for AirPlay Connect power PrepareTurn AD7000W on Scenario 1 Connect to a WPS router Press the WPS button on your home Wi-Fi routerScenario 2 Connect to a non-WPS router Switch AD7000W to Assisted Wi-Fi Setup mode Collect settings of your home Wi-Fi routerOpen the configuration page of your home Wi-Fi router Launch the Internet browser for exampleOpen the Wi-Fi setup tool or control panel on your PC/Mac Option 2 Use your Wi-Fi enabled PC/MacOpen the built-in web page of AD7000W 192.168.1.1Click Preferences »»The Bookmarks menu is displayed Change the internal Wi-Fi settings of AD7000WEnter the network key if required Play Stream audio from your iTunes music library to AD7000WStream from your iPod touch/iPhone Stream from your PC/Mac If your iTunes host device is a Wi-Fi enabled PC/Mac Use advanced sound settingsControl play If your iTunes host device is an iPod touch/iPhone/iPadCompatible iPod/iPhone/iPad Play from an external deviceUSB socket on the back of AD7000W Start music play on the external audio playerDownload the update file Update firmware20 EN Wireless SpecificationsAmplifier SpeakersWi-Fi network connection failed TroubleshootingRemove any obstacles between AD7000W and your Wi-Fi router AD7000W10/12UMV2.0
Top Page Image Contents