3 Get started
ON 
Standby
Always follow the instructions in this chapter in | POWER |
| |
sequence. |
|
Connect power
Caution
•• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the docking system.
•• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.
Note
•• The type plate is located on the bottom of the docking system.
Connect the AC power adapter between
•the DC IN socket at the back of the docking system, and
•the power supply.
Turn on
Press POWER.
»»The docking system switches to the last selected source.
6EN
Switch to standby mode
Press POWER again to switch the docking system to standby mode.
»»The clock (if set) is displayed.
Select a source
Press SOURCE/SET repeatedly to select a source: FM preset, FM, Bluetooth, or AUX in.
Note
•• When an
Set time
1 Press and hold SOURCE/SET for two seconds.
»»[24H] or [12H] begins to blink.
2 Press - TUNE/TIME or TUNE/TIME+ to select [24H] or[12H] for 12 or 24 hour format.
3 Press SOURCE/SET to confirm.
»»The hour and minute digits begin to blink.
4 Press - TUNE/TIME or TUNE/TIME+ repeatedly to set the hour.