Radio | Clock/Timer |
Storing preset stations auto- matically
•In FM, MW, SW, and LW mode, press and hold AUTO SCAN until SCAN appears.
➜The set scans stations with strong signal strength and stores them as preset sta- tions automatically.
5Press SET TIME once to confirm.
➜ The set exits time setting.
Helpful hints:
–During setting time, if you press 2 or do not operate for more than 10 seconds, the set automatically exits time setting.
Storing preset stations manu- ally
You can store up to 10 stations for each band respectively on PRESET for easy access.
1In FM, MW, SW, and LW mode, tune to your desired radio station (See "Auto tuning" and “Manual tuning”).
2Press and hold number keys to store the pre- set station.
Helpful hints:
–If you have already saved a FM, MW, SW, or MW station in that preset number, it will be overwritten by a new station.
–Preset stations of each band do not overwrite each other.
Selecting a preset station
•In FM, MW, SW, and LW mode, press NUM- BER
Viewing clock
You can also view clock in tuner mode.
•Press DISPLAY repeatedly.
Setting time
You can only set time in standby mode.
1Press and hold SET TIME until hour digits flash.
2Press VOLUME +/- to set hour.
3Press SET TIME once to confirm.
➜ The minute digits flash.
4Press VOLUME +/- to set minute.
Setting timer
You can only set timer in standby mode.
1Press and hold TIMER/SET TIMER until
ON appears and hour digits flash.
2Press VOLUME +/- to set hour.
3Press TIMER/SET TIMER once to con- firm.
➜Minute digits flash.
4Press VOLUME +/- to set minute.
5Press TIMER/SET TIMER once to con- firm.
➜
OFF appears.
➜Hour digits flash.
6Press VOLUME +/- to set hour.
7Press TIMER/SET TIMER once to con- firm.
➜Minute digits flash.
8Press VOLUME +/- to set minute.
9Press TIMER/SET TIMER once to con- firm.
➜FM, MW, SW, or LW flashes.
10Press VOLUME +/- or SOURCE to select band for timer.
➜Preset station number flashes.
11Press VOLUME +/- or press the desired number key to set preset station number.
12Press TIMER/SET TIMER once to con- firm.
➜Volume level digits flash.
13Press VOLUME +/- to set the volume level for timer.
14Press TIMER/SET TIMER once to con- firm and exit timer setting.