Philips SA4428 manual Connect and charge, Use the supplied USB cable, Battery level indication

Page 12

3.4 Connect and charge

When you connect the player to the PC, it automatically charges.

3.4.1 Use the supplied USB cable

1Before you use the player for the first time, charge it for at least 5 hours.

>The battery2 has a 100% charge after 4 hours and an 80% charge after 2 hours.

2Connect the supplied USB cable to the mini USB port at the bottom of the player, the other end to your PC.

>The player will start to charge as soon as it is connected to your PC.

Note The player is fully charged when the charging animation stops and is displayed. Your fully charged player will allow up to 20 hours2 of music playback.

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:

Full

Two-thirds full

Half full

Low

Empty

Note When the batteries are almost empty, the low battery screen blinks. The player saves all settings and unfinished recordings and switches off in less than 60 seconds.

2Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

8

Image 12

Contents Digital audio player Need help? Contents Update your player Important safety information General maintenanceHearing Safety Important for models supplied with headphones Copyright informationData logging Disposal of your old product ModificationsPage Your new player What’s in the boxRegister your product Getting started Overview of controls and connectionsHeadphone jack Install Main menuUSB port Battery level indication Connect and chargeUse the supplied USB cable Transfer EnjoyPlayer offers the following music mode options Detail operationControl Your player supports MP3 and WMA formatsLimit the volume Find your musicPlay a preset radio station Connect the headphonesRadio1 Auto tune radio stationsSave a new frequency under a preset Recordings Play recordingsDelete your recording Upload recordings to the computerSettings Equalizer custom settings Bar indicator shows current levelUse your player to store and carry data files Installing Windows Media Player 11 WMP11 Music transferAdd music files to WMP11 library Add to Library dialog box appearsClick Close when done Click Advanced Options to expand the dialog box Click AddAdd folder dialog box appears Rip songs from a CD Insert the Audio CD into the CD drive of the computer Selected tracks are converted and added to the WMP11 librarySync your Windows Media contents to your player Set up your player Switch between automatic and manual syncSelect and prioritize what syncs automatically If WMP11 selects to sync your device manually, click FinishDevice Setup dialog box appears Select files and playlists for manual sync If necessary, remove items from the list Manage your Windows Media Player Playlist Copy files from your player to your computerCreate a regular Playlist Create an Auto Playlist All your playlists will be displayed in the Contents pane Content in the playlist appears on the List paneEdit playlist Manage your files and playlists in Windows Media Player Transfer playlists to your playerSearch for music via WMP11 Delete files and playlists from WMP11 libraryDelete files and playlists from your player Click on Philips GoGear SA44xx in the left Navigation paneEdit song information via WMP11 Advanced Tag Editor dialog box appearsFormat your player via WMP11 Update your player Click UpdateManually verify software status Technical data Page Frequently asked questions My player cannot power onThere is no music on my player after transfer My player hangsSome songs do not show up or playback on the player Page Abc