Philips TL960A5T Special Features, Connecting two recorders in series, Lock function

Page 14
sREC.

6.SPECIAL FEATURES

Besides the functions described above, your video recorder has a number of other special features for additional ease of use.

Find out more about them below.

Connecting two recorders in series

You can connect two recorders in series. This enables you to perform uninterrupted surveillance. The first recorder starts the second at the appropriate time. The first recorder will be in RECORD mode. The second will be in STOP or STANDBY.

Note:

*On the first recorder the ’REPEAT RECORD’ function must be switched off.

The lock function

You can lock the video recorder to prevent unauthorised use.

1In the main menu select the ’BASIC SETTINGS’ line.

2Select the ’SEC CODE’ line and switch the function ’ON’

by pressing button S/CL .

3To confirm, press button OK . The words ’LOCKED XXXX’ will appear in the display on the video recorder.

4To enter your personal 4-digit security number, use digit buttons 0-9 .

5To confirm, press button OK .

6To unlock the video recorder, press any button and enter

your security number with digit buttons 0-9 . The machine is now ready for use again.

Note:

*If you have forgotten your number, contact your dealer or customer service point.

Record Check

If you press the button while recording, the last few seconds of the recording will be shown.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Instructions Philips TL960A5T Important Safeguards USE Page Safety tips ContentsRear of the appliance Summary of BUTTONS, Controls and SocketsFront of the appliance On-Screen Display OSD Connecting to an input sourceConnecting to the mains Basic settings Setting the time/date on the video recorderStill picture/slow motion Playing a PRE-RECORDED CassetteFast forward and rewind Rectifying picture disturbances Recording Directly Erase protection2Select an alarm line. Start playback by pressing Alarm settingsAlarm chart 3If you want to delete all entries, pressChecking or changing a Timer block Timer settingsInterrupting a Timer recording and standby mode Programming RecordingsLock function Special FeaturesConnecting two recorders in series Record CheckTroubleshooting Problem Possible causeRecommended servicing Safety TipsPrecautionary safety measures/Tips InspectionpointTechnical data Connection SignallevelAccessories supplied
Top Page Image Contents