Philips TL960A5T Connecting to an input source, Connecting to the mains, On-Screen Display OSD

Page 7
rSTANDBY

2.INSTALLATION. HOW TO INSTALL YOUR VIDEO RECORDER.

Connecting the television/monitor

 

Connections on the control socket

Connect your monitor/television set to the corresponding VIDEO OUT socket on the video recorder with a BNC cable. Connect your monitor/television set to the corresponding AUDIO OUT socket on the video recorder with a cinch cable.

Instead of using the BNC-cable you can also use the scart cable as a connection between scart socket and televi- sion/monitor.

Select programme number ’EXT’, ’0’ or ’AV’ on your moni- tor/television set to play recordings.

Consult the operating manual for your monitor/television set for further information.

Do not connect any external voltage sources to the 9 contacts on the control terminal as this could damage the inputs and outputs.

To connect the wire, remove 5 - 10 mm of the insulation and insert the bare wire into the relevant opening right up to the insulation.

Connecting to an input source

Connect your video source (e.g.: camera) to the corresponding VIDEO IN socket on the video recorder with a BNC cable. Connect your audio source (e.g.: camera with a microphone) to the corresponding AUDIO IN socket on the video recorder with a CINCH cable.

See "Technical Data" for more information on the signal level at the control terminal.

Connecting to the mains

1Connect the appliance end of the power cable into mains

socket 5 at the rear of the video recorder.

2Plug the other plug into the wall socket.

20:00

Note:

* The video recorder switches on automatically when

you insert a cassette or press button .

*When ’SET CLOCK’ appears in the display or if the clock time flashes in the display, e.g.:’20:00, you must set the clock.

*When ’PL’ (POWER LOSS) appears on the screen, press button S/CL .

On-Screen Display (OSD)

1Press button

MENU/TRACKING

with the recorder in

STOP mode to call up the On-Screen Display (OSD).

2Press buttons

 

to go to the required line in the

XY

main menu.

 

 

 

MAIN MENU

CLOCK SETTINGS

BASIC SETTINGS

ALARM SETTINGS

ALARM MEMORY

TIMER SETTINGS

HEAD USAGE TIME 000000H

------------------------

vwOK/MENU

3If there is more than one choice, select the one you

require by pressing button

S/CL

.

 

 

4To confirm, press button

 

 

.

 

OK

 

 

5To exit from the OSD, press button MENU/TRACKING .

The bottom line of the screen displays information on operation.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions Philips TL960A5T Important Safeguards USE Page Contents Safety tipsFront of the appliance Summary of BUTTONS, Controls and SocketsRear of the appliance Connecting to the mains Connecting to an input sourceOn-Screen Display OSD Setting the time/date on the video recorder Basic settingsFast forward and rewind Playing a PRE-RECORDED CassetteStill picture/slow motion Rectifying picture disturbances Erase protection Recording Directly3If you want to delete all entries, press Alarm settingsAlarm chart 2Select an alarm line. Start playback by pressingProgramming Recordings Timer settingsInterrupting a Timer recording and standby mode Checking or changing a Timer blockRecord Check Special FeaturesConnecting two recorders in series Lock functionProblem Possible cause TroubleshootingInspectionpoint Safety TipsPrecautionary safety measures/Tips Recommended servicingConnection Signallevel Technical dataAccessories supplied
Top Page Image Contents