CD Player, CD Display Indication, Playing a CD

CD PLAYER

English

–Cd: CD door open/scanning for CD.

–Total track number: in stop mode.

–Current track number: during CD play.

–Current track number flashes: in Pause mode.

–SHUFFLE/REPEAT modes: when the respective mode is activated.

–PROGRAM: When active. P also appears briefly when you store a track.

–nO: no disc/ error in CD operation or with the CD (see Troubleshooting)

–E: error in CD operation.

–F: programme memory full

1.Set the source selector to CD

2.To open the CD door, lift the CD door edge marked LIFT TO OPEN.

3.Insert a CD with the printed side facing up and press the CD door gently to close.

™The CD player scans the contents of the CD and the total number of tracks is displayed.

4.Press PLAY•PAUSE 2; to start playback.

5.Adjust the sound using the VOLUME and DBB controls.

6.To interrupt playback press PLAY•PAUSE 2;. To resume, press PLAY•PAUSE 2; again.

™The current track number flashes in the display

7.To stop CD play, press STOP 9.

8.To switch off the set, adjust the source selector to TAPE/POWER OFF position (with the cassette keys released)

Note: CD playback will also stop when:

–the CD door is opened;

–the source selector is in the TAPE/RADIO positions;

–the CD has reached the end.

PROGRAM

PLAY

ECORD

PAUSE	STOP-OPEN

SEARCH	SHUFFLE

CD MODE

STOP

PLAY•PAUSE

During playback, you can use the SEARCH keys to select a particular track.

1.Press SEARCH § once for the next track, or press repeatedly until the desired track number appears in the display.

Press SEARCH ∞ once to return to the beginning of a current track. Press SEARCH ∞ more than once for a previous track.

2.If you have selected a track number in the stop or pause position, you will need to press PLAY•PAUSE 2; to start playback.

1.Press and hold down SEARCH ∞ or §.

™ The CD is played at high speed and low volume.

2.When you recognize the passage you want, release the SEARCH key.

SHUFFLE

CD MODE

STOP

PLAY•PAUSE