Philips 227E3Q user manual Remove Base Stand, Resolution notification, Physical Function Tilt

2. Setting up the monitor

Resolution notification

This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz.When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results.

Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.

Physical Function

Tilt

2.3 Remove Base Stand

Remove the Base Stand

Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.

1.Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.

2. Detach the base stand away from the base column by:

(1) Use your fingers to loosen the screw located at the bottom of the base.

(2) Gently move up-and-down to release the latch that locks the base and pull the base away from the base column.

1

2

8