Philips PD7008/51 user manual Get started, Charge the battery

Page 14

nMENU

• Accesses or exits the disc/TV menu.

oSOURCE

• Switches between DVD, USB, and TV.

3 Get started

Caution

Use the controls only as stated in this user manual.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of your player.The model number and serial number are on the bottom of your player.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Charge the battery

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the player.

Use only the supplied AC adaptor to charge the battery.

Note

The type plate is located on the bottom of the player.

You can only charge the player when it is in power-off mode.

1Slide the POWERON/OFF switch to OFF position.

2Connect the supplied AC adaptor to the player and to the AC outlet.

English

EN 15

Image 14
Contents UK ǜǻǾȒǮǺǵǷ ǷǻǽǵǾǿȀǯǭȄǭ Contents Important safety instructions Important Safety InstructionsHearing safety Listen at a moderate volumePage Recycling Page Your portable DVD player IntroductionWhat’s in the box Overview of the main unitPower supply socket Open Opens the disc compartment Overview of the remote control Page Charge the battery Get startedInstall remote control battery Connect TV antenna Connect additional equipmentConnect a TV Select OSD language PlayTurn on Play discsSelect audio language Play from USBPlay options Select subtitle languageRotate pictures Repeat a sectionZoom Setup your TV Watch TVAdjust settings Product information Ntsc & PALTroubleshooting Function does not work for this disc. Refer to the disc Koninklijke Philips Electronics N.V. All rights reserved