Philips PD7008/51 user manual Install remote control battery

»The charge indicator turns on. It takes less than 6 hours to fully charge the battery.

»When the battery is fully charged, the charge indicator turns off.

Install remote control battery

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate.

For fi rst-time use:

1Remove the protective tab to activate the remote control battery. To replace the remote control battery:

16EN