Haier AC182XCERA Connecting the Piping, Install the Drain Hose, Flare Processing, Bending Pipes

Installation Procedures

5.INSTALL THE DRAIN HOSE

Select whether the drain hose will be connected to the left or right side.(Fig.3)

Insert the drain hose into the drain pan, then secure the drain hose with a nylon fastener.(Fig.6)

Wrap the insulation (drain hose)around the drain hose connection.(Fig.7)

Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the indoor unit.(Fig.18)

Fig. 18

Remove the hole cover.

Arrange the drain hose	Drain hose
lower than this portion

OK

NO

Fig. 19	Piping hole
VT wire hole	Base (Bottom)
	Intake grill
Pass the drain hose through here	Cut the grill

VT wire

Drain hose

OUTDOOR UNIT INSTALLATION

CONNECTING THE PIPING

1.FLARE PROCESSING

(1)Cut the connection pipe with pipe cutters so that the pipe is not deformed.

(2)Holding the pipe downward so that cuttings cannot enter the pipe, remove the burrs.

(3)Remove the flare nut from the indoor unit pipe and outdoor unit and insert the flare nut onto the pipe, and flare with a flaring tool.

2. BENDING PIPES

The pipes are shaped by your hands. Be careful not to collapse them.

Fig. 21

OK NO

Extend the pipe by unwinding it

12