Haier AC142XCERA, AC182XCERA operation manual Cleaning and Care, Cleaning the Air Filter

Page 7

Cleaning and Care

CAUTION

Before cleaning the air conditioner ,be sure to turn it off and disconnect

 

the Power Supply Cord.

 

 

Be sure the Intake Grill is installed securely.

 

When removing and replacing the air filters, be sure not to touch the heat

 

exchanger, as personal injury may result.

Cleaning the Air Filter

Open the Intake Grill

1.Pull out both sides and the center of the Intake Grill.

4.Re-attach the Air Filters to the Intake Grill.

1The Filters fit onto the inside of the intake Grill. (figure 1)

2The bottom edges of the Air Filters should fit into the filter brackets. (figure 1)

3The Air Filters should be pushed down so that their top edges fit under the projections at the top of the Intake Grill. (figure 2)

 

 

Air Filter

 

About 30 mm

Side Panel

 

(Figure 2)

Hook

(Figure 1)

 

 

 

 

Notch

 

 

 

Arm

Filter bracket

 

 

 

 

Arm

 

 

 

 

Intake Grill

 

 

2.Pull the Air Filters upward to remove them.

Push the Air Filter handles away from the Intake Grille in direction as illustrated, then pull out Air Filters.

Air Filter

Bracket

Base

Handle

3.Clean the Air Filters.

Remove the dust from the Air Filters by vacuum cleaner or washing them. After washing, allow the Air Filters to dry thoroughly in an area protected from sunlight.

5.Push in both sides and the center of the Intake Grill.

Dust can be cleaned from the Air Filter either with a vacuum cleaner, or by washing

the filter in a solution of mild detergent and warm water. If you wash the filter, be sure to allow it to dry thoroughly in a shady place before reinstalling.

If dirt is allowed to accumulate on the Air Filter, air flow will be reduced, lowering operating efficiency and increasing noise.

During periods of normal use, the Air Filters should be cleaned every two weeks.

5

Image 7
Contents Intdoor Unit Installation Manual Contents Disposal of the old air conditioner WB C DB CDB C WB C Safety Precautions Name of Parts Cleaning the Air Filter Cleaning and CareOperation and Performance Heating Performance Operation TipsLocation InstallationSelecting the Mounting Position Floor console Installation ProceduresDrilling for Piping Preparing Indoor Unit InstallationUnder Ceiling Type Installing Indoor Unit Installing BracketsBending Pipes Connecting the PipingInstall the Drain Hose Flare ProcessingPiping Connection AC142XCERA AC182XCERA HOW to Connect Wiring to the Terminals Indoor Unit Side Electrical WiringWiring of indoor unit Indoor unit communication addresses setting Indoor Mount the Cover Plate Intake Grill Electrical WiringMount the cover plate.Left Followings are not problems Trouble ShootingPoor cooling or heating Abnormal communication Haier Group

AC142XCERA, AC182XCERA specifications

The Haier AC182XCERA and AC142XCERA are advanced air conditioning units designed to provide optimal cooling and energy efficiency for residential and commercial spaces. Both models leverage modern technology to create a comfortable environment while emphasizing energy conservation and user-friendly operation.

The Haier AC182XCERA is a powerful unit with an impressive cooling capacity, making it suitable for larger spaces. It is equipped with a high-efficiency inverter compressor that adjusts the cooling output according to the temperature requirements of the room, resulting in significant energy savings. This technology not only reduces electricity bills but also extends the lifespan of the air conditioner. Its eco-friendly refrigerant ensures minimal environmental impact while maintaining effective cooling performance.

In contrast, the Haier AC142XCERA is designed for smaller areas, providing the perfect balance between performance and efficiency. Like its counterpart, it incorporates inverter technology, ensuring a smooth and quiet operation. Users can enjoy a consistent temperature without the disruptive noise commonly associated with traditional air conditioning units. The AC142XCERA is particularly popular in apartments and small offices where space is at a premium.

Both models feature multiple cooling and fan speeds that can be adjusted according to user preferences, allowing for a customized and comfortable atmosphere. The intelligent airflow system ensures that cool air is distributed evenly throughout the room, preventing hot spots and delivering an efficient cooling experience.

A key characteristic of the Haier AC182XCERA and AC142XCERA is their user-friendly control systems. Each unit comes with a remote control, enabling users to adjust settings from anywhere in the room. Additionally, both models offer a variety of modes, including sleep mode for nighttime operation, which adjusts the temperature automatically for enhanced comfort during sleep.

Maintenance is made easy with washable air filters that enhance air quality by trapping dust and allergens. Regular cleaning of filters helps maintain optimal performance levels and extends the life of the units.

In summary, the Haier AC182XCERA and AC142XCERA air conditioning units stand out with their efficient inverter technology, quiet operation, and user-centric features. Whether cooling a spacious living area or a compact room, these models deliver consistent performance and comfort while being mindful of energy consumption.