Philips MCP9350I/22 Connecting to the mains / Switching on and to standby, Switching to standby

Connecting to the mains / Switching ON and to standby

Connecting to the mains

After connecting all desired equipment as described, you can connect the Media Center to a wall socket.

1 Make sure all connections have been made before con- necting the Media Center to the mains supply.

2 First connect the mains lead to the AC-INPUT (10) and then to a wall socket.

> The Standby/On indicator (on the STANDBY-ON key 1) lights up orange.

>The Media Center is now in low power mode, consuming only a minimum amount of power.

Switching ON

•To switch on the Media Center from low-power mode, press the y STANDBY-ONkey (1) on the front of the Media Center.

> The Standby/On indicator (1) goes out.

•Press the y STANDBY-ONkey (1) again to put the Media Center back to low-power mode.

Switching to standby

•When the Media Center is switched on (Standby/On indicator out), press the y Standby key (1) on the remote control to place the Media Center in standby mode.

>The Standby/On indicator (1) lights up red.

•To switch the Media Center on again from standby mode, press the y Standby key (1) on the remote control again or the y STANDBY-ONkey (1) on the front of the Media Center.

>The Standby/On indicator (1) goes out.

Note: In both low-power and standby mode the Media Center is still consuming some power.To disconnect the Media Center from the mains supply completely, disconnect the mains lead from the wall socket.

17