Philips MCP9350I/22 manual Rear view

11

12 13

1RF IN - FM - Radio

For connecting to the antenna system or to a roof- mounted FM antenna (with an impedance of 75 W (ohm).

2RF IN - TV

For connecting to the cable antenna system.

3VIDEO IN 1 - S-Video

Video input socket for connecting to the S-Video output socket of a TV, cable/satellite set-top box, DVD player/recorder, etc.

4VIDEO IN 1 -Video (CVBS)

Video input socket for connecting to the CVBS (compo- site video) output socket of a TV, cable/satellite set-top box, DVD player/recorder, etc.

5AUDIO IN 1

Stereo audio input sockets for connecting to the audio output sockets of a cable/satellite set-top box, DVD player/recorder, audio equipment, etc.

6S-VIDEO OUT

12VIDEO IN 2 - Video (CVBS)

Video input socket for connecting to the CVBS (compo- site video) output socket of a TV, cable/satellite set-top box, DVD player/recorder, etc.

13AUDIO IN 2

Stereo audio input sockets for connecting to the audio output sockets of a cable/satellite set-top box, DVD player/recorder, audio equipment, etc.

14IR (infrared) BLASTER (2 x)

For connecting an IR (infrared) blaster in order to select channels on your cable/satellite set-top box via the Media Center remote control.

151394 (Firewire / i.LINK) - 6-pin(2 x)

For connecting to IEEE 1394 / Firewire / i.LINK compa- tible peripherals and devices such as an external hard disk that requires two additional pins for power supply..

16VGA

For connecting to a VGA (Video Graphics Array) enab- led monitor or flat screen TV.

Output socket for connecting to the input socket of S-Video enabled recording devices (DVD,VCR) or an S-Video enabled TV.

7DVI OUT

DVI-D (Digital Video Interface-Digital only) output soc- ket for connecting to the DVI-D input socket of a DVI- D enabled monitor or flat screen TV.

8LAN

For connecting to your local area network (LAN).

9DIGITAL AUDIO - Optical - Out

Optical output socket for connecting to the optical input socket of a receiver,TV or recording device (CD recorder,VCR, etc.).

10AC-INPUT (100-240V - 50/60Hz)

For connecting the Media Center to the mains.

11VIDEO IN 2 - S-Video

Video input socket for connecting to the S-Video output socket of a TV, cable/satellite set-top box, DVD player/recorder, etc.

17USB 2.0 (2 x)

For connecting USB 1.1 and 2.0 enabled devices.

18DIGITAL AUDIO - COAXIAL - Out

Coaxial output socket for connecting to the coaxial input socket of a receiver or recording device (e.g a DVD recorder).

19AUDIO OUT (2 x)

Stereo audio output sockets for connecting to the audio input sockets of a receiver or recording device (e.g a DVD recorder).

20SCART (RGB / CVBS)

For connecting to the SCART input connector of a TV.

Note:Wireless LAN antennas (802.11b/g) are already built in in the set so there is no need for connecting a wireless USB adapter in order to integrate the Media Center in your wireless netwerk.