DVD Menu Options
Advance Picture
Allows you to fine-tune the following video parameters.
Adv.Picture | Sound | Features |
Preferences
TrueLife
DCDi
Gamma
Chroma Delay
Use ← or → to select other options, ↓ to enter the submenu,
RETURN to leave the menu.
TrueLife (for Progressive Scan output only)
Produces a more dynamic picture by increasing the contrast and color intensity.
➜Use 1 2 to select the following option; {0 to +7}.
DCDi (for Progressive Scan output only)
DCDi (Directional Correction Deinterlacing) computes and tracks the angle of edge to fill in the missing pixels on the TV screen.
➜On – Optimize the picture quality significantly, especially during the slow motion playback.
➜Off – Select this to disable DCDi function.
Gamma (for Component output only)
Enables you to adjust the intensity of the picture
➜Use 1 2 to select the following option;
Chroma Delay (for Component output only)
The chroma (color) and luma (brightness) signals are not synchronized.This setting allows you to adjust the advance delay of the chroma signal to yield a perfectly clear picture.
➜Use 1 2 to select the following option;
4:3 Aspect (for Progressive Scan output only)
To adjust the ratio of the pictures on the TV screen.
➜4:3 Pillarbox – For display of 4:3 picture on 16:9 TV screen without stretching.
➜NL Stretch – For display of 4:3 image on 16:9 TV with
➜Auto – No aspect ratio adjustment
HiVideoDef (for HDMI/DVI output only)
You are able to select the resolution for finer color selection when picture appears on the TV screen.The available options will be displayed once you have connected the HDMI connection (see page 12).
➜Use 1 2 to select the following option; {480p, 576p, 720p, 1080i,AUTO}.
Helpful Hints:
–If no display appears on the TV screen due to unsupported resolution, reconnect any available interlace video output to you monitor to
–Only 480p and 576p are available for progressive scan analogue output.
E n g l i s h
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
31