Philips PD709/12 user manual Charge the battery

Page 13

Charge the battery

Caution

‡Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the player.

‡Use only the supplied AC adaptor to charge the battery.

Note

‡The type plate is located on the bottom of the player.

‡You can only charge the player when it is in power-off mode.

1Slide the 32:(5212)) &+5 switch to OFF (CHR) position.

2Connect the supplied AC adaptor to the player and to the AC outlet.

»The charge indicator turns on. It takes about 4.5 hours to fully charge the battery.

»When the battery is fully charged, the charge indicator turns off.

14EN

Image 13
Contents Register your product and get support at Contents Important Safety Instructions ÀOOHGREMHFWVOLJKWHGFDQGOHV  Hearing safety English Recycling Manufactured under license from Dolby Laboratories Introduction Your portable DVD playerWhat’s in the box Overview of the main unit ‡ &RQÀUPVDQHQWU\RUVHOHFWLRQ Preparation Get startedCharge the battery Connect additional equipment Turn on Use your playerSelect OSD language Play discsPlay options Adjust settingsPAL & Ntsc Product informationTroubleshooting