COBY electronic MP-C353 instruction manual There is no sound during playback

TROUBLESHOOTING

There is no sound during playback.

Check the volume level.

Ensure that the headphones are attached securely to the player.

The sound quality of the music is poor.

Try playing the file on your computer. If the sound quality is still poor, try downloading the file again or re-encoding the file yourself.

Ensure that the bit rate of the file is not too low. The higher the bit rate of the file, the better it will sound. The minimum recommended bitrate is

128kbps for MP3s and 96kbps for WMAs.

Try lowering the volume of the player.

Ensure that the headphones are attached securely to the player.

The player will not play my music file.

Ensure that the file is in a compatible format (MP3, WMA).

The file may be copy-protected and you no longer have authorization to play this file. If you feel this is in error, please contact the service from which you downloaded the file.

The LCD characters are corrupted or something is wrong with the display.

Ensure that the correct language has been selected.

Try pressing the Reset key on the back of the player with a pin.

The player has malfunctioned.

Try pressing the Reset key on the back of the player with a pin.

Try updating the player’s firmware. Please refer to the Firmware Upgrades section of this manual for detailed instructions.

www.cobyusa.com Page 31