Evacuation, Charging the System | Haier HC18-60A1VAR/S instruction

1.Tubing should be cut square. Make sure it is round and free of burrs at the connecting ends. Clean the tubing to prevent contamination from entering the system.

2.Make sure that both refrigerant stop valves at the outdoor unit are closed.

3.Push the tubing into the fitting until it stops. This prevents flux from getting into the system. 4.Remove the cap and Schrader valve core from the service port to protect the valve seals. 5.Wrap a wet rag around the valve stub before brazing.

6.Braze the joints of interconnecting tubing. Flow dry nitrogen into the shutoff valve port and through the tubing while brazing.

7.After brazing quench with a wet rag to cool the joint. Reinstall the Schrader core in the valve, if removed for brazing.

8.Pressurize the lines to 150 psi maximum with dry nitrogen. Check for leaks at all joints with liquid detergent. If a leak is found, repair it after removing the nitrogen. Repeat the process and re-ckeck.

9.Do not purge the lines with refrigerant. Evacuate the lines and indoor coil.

Evacuation

All new installations must be evacuated to a deep vacuum in order that all noncondensible gases and moisture are removed prior to charging the system. Air in a system causes high condensing pressure, which increases power consumption and reduces performance. The presence of moisture in a system can render it inoperable in a very short time. Proper evacuation assures a dry, uncontaminated system. Here is the recommended evacuation procedure:

1.Connect vacuum pump to both liquid and suction valve service ports.

2.Evacuate the interconnecting tubing and indoor coil to 500 microns or less for a minimum of 30 minutes. Close the valve to the vacuum pump and wait 15 minutes. Vacuum should not rise above 800 microns. If unable to obtain 500 microns, or vacuum rises above 800 microns over 15 minutes period, discontinue evacuation, pressurize and check for leaks. Repair any leaks found and repeat the step 2.

3.Close valve to the vacuum pump and stop pump.

4.When sure of a tight, well evacuated system, charge with refrigerant.

Charging the System

(For systems with capillary tube or fixed orifice metering device)

Before checking the system charge, make sure that the outdoor unit and indoor coil must be an approved match per the unit specification. The indoor conditions should be within 2F of the desired comfort conditions.

!WARNING - Do not vent refrigerant to the atmosphere! It is a violation of federal law to do so. If the refrigerant needs to be removed from a system to correct the charge inside, always use a recovery or recycling device.

!WARNING - To prevent personal injury, wear safety glasses and gloves when handling refrigerant.

HC18-60A1VAR/S, HC18-60D1VAR, HC18-60C1VAR specifications

Haier, a recognized brand in the home appliance sector, has consistently focused on delivering innovative and reliable products to enhance consumer convenience. Among their impressive offerings are the Haier HC18-60C1VAR, HC18-60A1VAR/S, and HC18-60D1VAR, which are compact and versatile refrigeration solutions designed to meet diverse storage needs.

The Haier HC18-60C1VAR is known for its impressive capacity and energy efficiency. With a total storage capacity that effectively accommodates a variety of food items, it is perfect for small kitchens, apartments, or dormitories. The unit features a user-friendly design that includes adjustable shelves, ensuring that users can customize the internal space according to their storage requirements. The efficient cooling technology employed in this model ensures that food remains fresh for longer periods while minimizing energy consumption.

Similarly, the HC18-60A1VAR/S model stands out with its sleek finish and modern aesthetics. This model integrates advanced cooling technology that enhances temperature stability, preventing food spoilage. The inclusion of a reversible door offers added convenience, allowing users to adapt the refrigerator to their specific kitchen layout. Additional features such as an adjustable thermostat and LED lighting make it easier for users to monitor and manage their food storage effectively.

On the other hand, the HC18-60D1VAR model is specifically designed for versatility and performance. This refrigerator model is equipped with a separate freezer compartment, providing users with the ability to store frozen foods efficiently. The frost-free technology is another highlight, as it eliminates the need for manual defrosting, a common issue with traditional refrigerators. This feature not only saves time but also ensures that the freezer maintains optimal performance.

All three models share common characteristics such as quiet operation, making them ideal for residential or office environments. They are designed with environmentally friendly refrigerants, ensuring compliance with modern sustainability standards. The easy-to-clean interiors and exterior surfaces also facilitate maintenance, adding to their user-friendly appeal.

In summary, the Haier HC18-60C1VAR, HC18-60A1VAR/S, and HC18-60D1VAR are exemplary compact refrigerators that blend performance, efficiency, and design. With features like adjustable shelving, energy efficiency, and user-friendly technologies, these models cater to the needs of modern consumers looking for reliable refrigeration solutions. Whether for small homes, offices, or student housing, Haier has a model that fits seamlessly into any lifestyle.