For the first 10 seconds of cue/review, fast playback sound can be heard. When searching at a higher speed, playback sound will not be heard. During cue/review, the counter will be displayed, regardless of the display mode setting (page 34).
1Tip
When fast playback is done to the end of the last message, “END” flashes for 3 seconds and the OPR indicator lights up in green. (You cannot hear the playback sound.) If you keep . pressed while “END” is flashing, the messages are played back rapidly, and normal playback will start at the point you release the button.
When “END” stops flashing and the OPR indicator goes off, the unit will stop at the beginning of the last message.
If the last message is long and you wish to start playback at a later part of the message, keep > pressed to play back the messsage to the end and then press . while “END” is flashing to go back to the desired point . (For messages other than the last one, go to the beginning of the next message and play backward to the desired point.)
Playing back a message repeatedly
— Repeat Play
During playback, press NPLAY/STOP for more than one second.
““ will be displayed and the selected message will be played back repeatedly.
To resume normal playback, press NPLAY/STOP again. To stop playback, press xSTOP.
Playing the beginning of each message
— Scanning Play
During stop mode, press NPLAY/STOP for more than one second. “SCAN” will be displayed in the display window and the first 5 seconds of each message in the selected file will be played back.
When you find the desired message, press NPLAY/STOP. The message will be played back until the end.
Playing back all messages in a file continuously
— Continuous Play
See page 38.