Sony ICD-R100PC operating instructions 31GB, To listen to the same message again

Page 31

“,” is displayed when the number of the message with alarm setting is selected.

At the set time, the alarm will sound for about 10 seconds and the selected message will be played back.

During playback, “ALARM” will flash in the display window.

When the playback ends, the unit will stop automatically at the beginning of that message.

To listen to the same message again

Press NPLAY/STOP. The same message will be played back from the beginning.

To cancel the alarm setting before the playback starts

Press xSTOP while the alarm sound is heard. You can stop even when the HOLD function is activated.

Notes

•You cannot set the alarm if you have not set the clock or there is no message in the selected file (the unit will not enter the alarm setting mode when you press MENU in Step 2 on page 28).

•If you try to set the alarm to play back a message at a previously set time on another message, “PRE SET” will be displayed, preventing new settings.

•If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back.

•If the alarm time comes during recording, alarm will sound for 10 seconds after the recording is finished and playback begins. “,” will flash when the alarm time comes.

•If more than one alarm time comes during recording, only the first message will be played back.

•When the alarm time comes when the unit is in the menu mode, alarm will sound and the menu mode will be cancelled.

•If you erase the message you set the alarm to play back, the alarm setting will be cancelled.

•If you add an index to the message you set the alarm to play back, playback will stop at the index.

•If you erase the index on the message you set the alarm to play back, the alarm setting will be cancelled.

•You can adjust the playback volume with the VOL control.

•If the alarm time comes during erasing, alarm will sound for 10 seconds after the erasing is finished and playback begins.

•Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see page 32.

Continued

Other Functions

31GB

Image 31

Contents IC Recorder Table of Contents Additional Information Erasing What is the ICD-R100 IC recorder?Recording PlaybackGetting Started FeaturesCompartment lid Slide and lift the batteryAlkaline batteries with correct polarity, and close the lid Replacing the batteries Set the date Setting the ClockSet the time Exit from the menu modeStart recording Select the file10GB To pause recording Do this Stop recording11GB To stop recording12GB Remaining memory indication 13GB14GB Select the message numberFor private listening Adjust the volumeStart playback 15GBOther operations Do this Searching forward/backward during playback Cue/Review16GB To stop playback Do thisPlaying the beginning of each message Scanning Play Playing back a message repeatedly Repeat Play17GB Erasing messages one by one To cancel erasing18GB 19GB Erasing all messages in a file20GB To cancel VORSet the VOR selector to on Press zREC/STOP or xSTOP to stop the recording Adding a Recording to a Previously Recorded Message21GB During playback, press zREC/STOP for more than 1 second22GB When recording with an external microphoneWhen recording from other equipment Recording with an External Microphone or Other EquipmentTo play messages with normal speed Adjusting the Playback SpeedTo play back rapidly To play back slowly24GB Dividing a Message by Adding an IndexTo play the divided messages continuously To add an index during playback25GB To play the message you marked with an indexYou can combine two messages into one by erasing the index 26GBMoving Messages to a Different File- Move Function Other Functions To cancel moving the messages28GB Playing Back a Message at a Desired Time with an Alarm29GB Set the alarm date30GB Playing Back a Message at a Desired Time with an AlarmSet the alarm time Press Menu to exit the menu mode31GB To cancel the alarm setting before the playback startsTo listen to the same message again 32GB 33GB Preventing Accidental Operation Hold function34GB Selecting the Display ModePresse . or to select SP or LP and press NPLAY/STOP Selecting the Recording ModePress Menu to exit the menu mode Other Functions 35GB36GB Turning off the Beep SoundPress . or to select on or OFF and press NPLAY/STOP Beep patterns Meaning 37GB38GB Playing Back All Messages in a File Continuously39GB PrecautionsSymptom Remedy Troubleshooting40GB 41GB Main unit Index to Parts and Controls42GB 43GB RearDisplay window44GB Menu map45GB 46GB IndexX, Y, Z 47GB48GB SpecificationsAdditional Information Différentes méthodes d’enregistrement Table des matièresInformations complémentaires Effacement Qu’est-ce que l’enregistreur à CI ICD-R100?Enregistrement LecturePréparation Caractéristiques1re étape Installation des piles Remarques Réglez la date 2e étape Réglage de l’horlogeRéglez l’heure Quittez le mode de menuDémarrez l’enregistrement Sélectionnez le fichier10FR Pour activer une pause d’enregistrement Procédez comme suit Arrêtez l’enregistrement11FR Pour arrêter l’enregistrement12FR Indication de mémoire restante 13FR14FR Sélectionnez le numéro du messagePour une écoute individuelle Réglez le volumeDémarrez la lecture 15FRPour arrêter la lecture Procédez comme suit 16FRAutres opérations Pour Procédez comme suit 17FR Lecture répétée d’un message18FR Effacement de messages un par unPour annuler l’effacement Pour effacer partiellement un message Effacement de tous les messages d’un fichier19FR Pour effacer d’autres messagesPour désactiver la fonction VOR 20FRDifférentes méthodes d’enregistrement 21FRLors d’un enregistrement au départ de tout autre appareil Lors d’un enregistrement avec un microphone externe22FR Pour reproduire des messages à la vitesse normale Réglage de la vitesse de lecturePour reproduire des messages rapidement Pour reproduire des messages lentementDivision d’un message par insertion d’un index 24FRSuite page suivante Autres fonctions Insertion d’un index en cours de lecture25FR Pour reproduire les messages divisés en continuRemarques sur l’ajout/effacement d’un index 26FR27FR Autres fonctions Pour annuler le déplacement de messages28FR Lecture d’un message à une heure déterminée avec une alarme29FR Réglez la date de l’alarmeAppuyez sur NPLAY/STOP Réglez l’heure de l’alarmeAppuyez sur Menu pour quitter le mode de menu 30FRPour réécouter le même message 31FRAutres fonctions Suite page suivante 32FR 33FR Prévention des manipulations accidentelles Fonction Hold34FR Sélection du mode d’affichageAppuyez sur Menu pour activer le mode de menu Sélection du mode d’enregistrement35FR 36FR Désactivation du bip sonoreType de bip Signification 37FR38FR Lecture de tous les messages dans un fichier continu39FR Précautions40FR DépannageRemèdes Symptômes Remède 41FRInformations complémentaires Appareil principal Index des composants et des commandes42FR Restante ArrièreFenêtre d’affichage44FR Organigramme des menus45FR 46FR T, U 47FREMC-T15 Spécifications